How to make Fingerprint Bike starter by smartphone and Arduino nano | Fully Waterproof |

complete training how to make fingerprint bike starter with Arduino nano by android smartphone using Arduinodriod android application without any laptop or computer,
fully waterproof fingerprint bike starter by kuldeep panchal 9968612343
if you dont have any knowledge then you can make this fingerprint bike starter after watching my video step by step
download Arduinodroid android app from Play store
https://play.google.com/store/apps/details?id=name.antonsmirnov.android.arduinodroid2&hl=en_IN
download GT511C3 library fromgithub
https://github.com/sparkfun/Fingerprint_Scanner-TTL
add thid library into arduinodroid android application
goto menu option then click library then click add zip library then choose Fingerprint _Scanner-TTL-master.zip
before add zip library give storage access to this arduinodroid android application goto setting into your mobile then open apps option then open arduinodroid apps option then click permission then click storage

now open FPS Enroll Sketch for register your finger
after register finger
now open FPS ID Finger

add this code into void setup section
pinMode(6, OUTPUT);
pinMode(2, OUTPUT);
digitalWrite(6, HIGH)
digitalWrite(2, LOW);

add this code into void loop section
digitalWrite(6, LOW)
delay(1500);
digitalWrite(6, HIGH)

add this code into void loop section in else
digitalWrite(2, HIGH)
delay(1500);
digitalWrite(2, LOW)

add these code carefully

requirement parts for this project
1. Arduino nano https://robu.in/product/arduino-nano-board-r3-ch340-chip-with-usb-cable-solderedarduino-nano-r3-usb-cable/?gclid=CjwKCAjwwMn1BRAUEiwAZ_jnEk2SI7cVx3x0RzjvxLboNymdbZhEo7j5_K3G0ucrSc9OOo-13rXbSxoCFaUQAvD_BwE
2. GT511C3 Fingerprint sensor https://robu.in/product/fingerprint-scanner-ttl-gt-511c3/
3. 5 Volt DC Relay Module https://robokits.co.in/control-boards/interface-boards/5v-relay-module-expansion-board-for-arduino?gclid=CjwKCAjwwMn1BRAUEiwAZ_jnEjDTCn3s1tVTnTy67l_29HJ3ecAhs9QPVxbbmSr8PeRglWzB29lMeBoClMcQAvD_BwE
4.three 10K rasistance https://www.amazon.in/Deepak-Enterprise-carbon-film-resistor/dp/B01MYSUG1Q
5.one Red Led https://robu.in/product/5mm-red-dip-led-pack-of-50/
6.A-to-USB-2.0 Mini B Cable https://www.amazon.in/Robu-USB-2-0-USB-2-0-Cable-Arduino/dp/B0765YVWT4
7. any android smartphone
8.jumper wire (male to female) https://robu.in/product/20cm-dupont-wire-color-jumper-cable-2-54mm-1p-1p-male-female-40pcs/?gclid=CjwKCAjwwMn1BRAUEiwAZ_jnEqT3cApxT6YfydZ0bhX58VXWaunhbxngs8jeDRPjPNMr8viRZPR1vBoCXDwQAvD_BwE
9.7809 voltage (volage operating for arduino nano) https://robu.in/product/l78m09cv-l7809cv-to-220-linear-voltage-regulator-pack-of-3-ics/
10.housing case for cover sensor

keywords
how to program fingerprint sensor with Arduino nano
how to program GT511C3 fingerprint sensor with Arduino and android smartphone
complete training of fingerprint bike starter
how to make fingerprint bike starter
program Arduino nano using android smartphone
how to control 5 volt relay using arduino nano by fingerprint sensor
fingerprint sensors
arduinodroid IDE
how to control relay with arduino nano
robotic mind
kuldeep panchal
9968612343

Видео How to make Fingerprint Bike starter by smartphone and Arduino nano | Fully Waterproof | канала robotic mind