How to Solder & Test Gear Motors | Part 06 | Robotics for Kids (Bangla)

In this video (Part 06), we prepare our DC Gear Motors for the robot. We will solder wires to the motor terminals and test each motor individually to ensure they are working perfectly before assembly.

***** Why is this step important? *****
If you assemble the robot chassis with a bad motor or a loose wire, you will have to take everything apart later! Solder your connections for a permanent, vibration-proof fix.

*** Steps Covered ***
- Soldering wires to the 4 Gear Motors.
- Checking connections (Red/Black wires).
- Testing each motor with a battery to see if it spins.

Safety Tip: Be careful when using a soldering iron, as it gets very hot. If you are a kid, ask an adult for help!

*** Timestamps ***
[00:00] - Introduction: Preparing the Motors
[00:16] - Why you need to solder (Strong Connection)
[00:28] - The "Test Before Assembly" Rule
[00:45] - Final check of all 4 motors
[01:00] - Next Step: Chassis Assembly

*** Follow the Series ***
1. Introduction to the Series: https://www.youtube.com/watch?v=Pd-Ku60XT1Y
2. Components Discussion: https://www.youtube.com/watch?v=VmFhjGcNT8g
3. Arduino IDE Setup: https://www.youtube.com/watch?v=2ebTPhYt7EM
4. Ultrasonic Sensor Testing: https://www.youtube.com/watch?v=ZDaVaJoKuhU
5. Servo Motor Testing: https://www.youtube.com/watch?v=Z_ZihRhX4EE
6. DC Gear Motor Soldering (This video)
7. Coming Soon: DC Motor Driver Testing

*** Don’t forget ***
Like this video and subscribe to our channel for more tutorials
Share with friends interested in robotics

#arduino #arduinoproject #arduinoprogramming #arduinorobot #obstacleavoidrobot #ultrasonicsensor #arduinosensor #sensors #arduinoide #embeddedsystems #arduinoforkids
#roboticsforkids #iotbhai #robotics

Видео How to Solder & Test Gear Motors | Part 06 | Robotics for Kids (Bangla) канала IoT Bhai