Can you make stamps on a 3d printer? Yes, you can. Here's how.
In this video I will be showing you how to make great looking stamps on the Ender 3 V2 printer, and this will apply to any printer more or less, bowden, direct drive, glass bed, textured bed, etc. There should be a workable way for anyone in here.
Links:
The dedicated page for this TPU Stamps Video with files and profile(s) is here: https://www.lostintech.co.uk/tuning-tips/how-to-make-stamps-on-the-creality-ender-3-v2-and-other-bowden-extruder-based-printers/
My new channel that I reference in this video - I haven't actually uploaded yet but maybe by the time you read this I have, hey you could be the first subscriber - even my mum hasn't subscribed, so here it is - https://youtube.com/channel/UCTNibFFep5KsvcefnBwDuoQ
------------------------------------------------------------------------------------------
Reboots are all the rage these days, or that's what I've heard anyway.
I tried making stamps back in the good old days of 2020, and I didn't do too well at the time. Sure, I got stamps, but they were underwhelming to say the least.
So I'm back, what, less than 6 months later? Or maybe just over 6 months. Who cares?
Watch and see how much I have managed to improve the process and the results.
Please comment if you have anything to say! And even if you don't, then comment anyway - why not? I would!
Videos around every 1-2 weeks or sometimes a bit longer if I get bogged down in editing but you get the idea!
Credits:
Music: Ouroboros Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b....
Odyssey by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song/4995-odyssey
License: https://filmmusic.io/standard-license
Neon Laser Horizon by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song/7015-neon-laser-horizon
License: https://filmmusic.io/standard-license
Pamgea by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song/7016-newer-wave
License: https://filmmusic.io/standard-license
Chapters:
0:00 - Intro
0:20 - Announcement
0:51 - summary of the last attempt
1:25 - analysing what went wrong last time
1:32 - looking at a commercial stamp
2:00 - analysis of the imprint quality
2:31 - designing a removable handle
2:56 - Going through the options for improvement
3:29 - Take one
4:03 - Stamp Squish Theory
4:43 - How (not?) to design stamps in Inkscape
5:07 - How to export as svg in Inkscape
5:20 - Importing into Fusion 360
5:35 - Extruding for Backwards Text!
6:00 - TPU test 1
6:35 - Printing face down
6:57 - Tuning TPU
7:08 - Designing supports for face down printing
7:47 - TPU face down results
8:00 - The elephants foot in the room
8:24 - Face down improvements
8:36 - Text and detail issues
9:12 - Scaling up the design
9:20 - Design considerations for stamp imprints
9:48 - Really good results
9:55 - Designing a circular stamp setup
10:16 - Gluing base to stamp
10:35 - It's about the base!
11:07 - Infill
11:25 - Support support
12:12 - Avoiding lift and curl
12:52 - Sanding stamps
13:35 - The rectangular stamps
14:12 - Try my profiles!
14:35 - Summary
15:15 - How to actually stamp a stamp
15:40 - Wrap up and resources
Видео Can you make stamps on a 3d printer? Yes, you can. Here's how. канала Lost In Tech
Links:
The dedicated page for this TPU Stamps Video with files and profile(s) is here: https://www.lostintech.co.uk/tuning-tips/how-to-make-stamps-on-the-creality-ender-3-v2-and-other-bowden-extruder-based-printers/
My new channel that I reference in this video - I haven't actually uploaded yet but maybe by the time you read this I have, hey you could be the first subscriber - even my mum hasn't subscribed, so here it is - https://youtube.com/channel/UCTNibFFep5KsvcefnBwDuoQ
------------------------------------------------------------------------------------------
Reboots are all the rage these days, or that's what I've heard anyway.
I tried making stamps back in the good old days of 2020, and I didn't do too well at the time. Sure, I got stamps, but they were underwhelming to say the least.
So I'm back, what, less than 6 months later? Or maybe just over 6 months. Who cares?
Watch and see how much I have managed to improve the process and the results.
Please comment if you have anything to say! And even if you don't, then comment anyway - why not? I would!
Videos around every 1-2 weeks or sometimes a bit longer if I get bogged down in editing but you get the idea!
Credits:
Music: Ouroboros Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b....
Odyssey by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song/4995-odyssey
License: https://filmmusic.io/standard-license
Neon Laser Horizon by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song/7015-neon-laser-horizon
License: https://filmmusic.io/standard-license
Pamgea by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song/7016-newer-wave
License: https://filmmusic.io/standard-license
Chapters:
0:00 - Intro
0:20 - Announcement
0:51 - summary of the last attempt
1:25 - analysing what went wrong last time
1:32 - looking at a commercial stamp
2:00 - analysis of the imprint quality
2:31 - designing a removable handle
2:56 - Going through the options for improvement
3:29 - Take one
4:03 - Stamp Squish Theory
4:43 - How (not?) to design stamps in Inkscape
5:07 - How to export as svg in Inkscape
5:20 - Importing into Fusion 360
5:35 - Extruding for Backwards Text!
6:00 - TPU test 1
6:35 - Printing face down
6:57 - Tuning TPU
7:08 - Designing supports for face down printing
7:47 - TPU face down results
8:00 - The elephants foot in the room
8:24 - Face down improvements
8:36 - Text and detail issues
9:12 - Scaling up the design
9:20 - Design considerations for stamp imprints
9:48 - Really good results
9:55 - Designing a circular stamp setup
10:16 - Gluing base to stamp
10:35 - It's about the base!
11:07 - Infill
11:25 - Support support
12:12 - Avoiding lift and curl
12:52 - Sanding stamps
13:35 - The rectangular stamps
14:12 - Try my profiles!
14:35 - Summary
15:15 - How to actually stamp a stamp
15:40 - Wrap up and resources
Видео Can you make stamps on a 3d printer? Yes, you can. Here's how. канала Lost In Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Automaton Record Player?! - Weird stuff going on inside a PYE 5674 fully automatic turntableMonoprice Mini Delta MPMD Base Fan Replacement / Base Fan bearing noise repairM5StickC - How to control your lights from the M5Stick using MQTT and node-redUsing a 3d pen to "weld" PLA together!Weirdest way to keep filament dry? Also do silica gel bags actually work?Day 9 - How to create these abominations, and printing above or below the base in cura.Making a new logo - How I made the logo with an Adafruit Alphanumeric Display and Arduino.Fix Broken Extruder on MPMD Monoprice Mini Delta 3d Printer / Bowden FixThe Week in 3D: New Analytics in Printables! AI for Octoprint, Trees and moreI worked out exactly how much electricity 3D Printers use, whether you should care, can you save?How to improve printing TPU on Ender 3 V2 and other Bowden Printers - reduce or remove stringing.Hueforge - a very short intro of a very short introDay 3 - How to heat your hotend and bed at the same time on a 3d printer ( ender 3 v2 in the video )The ultimaker cura plugin you need, but might not know you need.The Elegoo Neptune 3 PLUS and MAX are HUGE. Let's take a look.The Week In 3D - Episode 2: Halloween, Marlin Input Shaping? Spooky Prusaslicer Trees??The Best PLA Filament in 2021? Find out which 3d printer filaments I recommend and why!The Week in 3D Episode 1: MakerBaker, Full Control, Huge Blobs and Klipper-Slingers!?No Purges?! The SOVOL SV04 IDEX prints really neat multicolour WITHOUT wasting too much filament!!!Introduction to Stepper Motors for 3D Printing - The Basics you probably need to know - Episode 1