Jet JMD18 Mill Drill Project - Headboard Brackets Cutting Unique Slots
Fun milling machine project on my Jet JMD18 Mill Drill. Seemed simple enough to take plastic angle brackets for a headboard and make them out of 2x2x1/8" Angle Iron, but there were some good challenges along the way.
Figuring out the math for the slots was good practice and this was a great project to leverage the Newell 700 DRO on my mill and cut an oversize slot with a 3/8" Garr Carbide end mill. Using the slitting saw to quickly get rid of 1.25" of Angle Iron also worked even better than I expected it would.
Mill work done on a Jet JMD18 Mill Drill. Working Holding with a Glacern Machine Tools (GMT) 5" standard vise.
Видео Jet JMD18 Mill Drill Project - Headboard Brackets Cutting Unique Slots канала BladesIIB
Figuring out the math for the slots was good practice and this was a great project to leverage the Newell 700 DRO on my mill and cut an oversize slot with a 3/8" Garr Carbide end mill. Using the slitting saw to quickly get rid of 1.25" of Angle Iron also worked even better than I expected it would.
Mill work done on a Jet JMD18 Mill Drill. Working Holding with a Glacern Machine Tools (GMT) 5" standard vise.
Видео Jet JMD18 Mill Drill Project - Headboard Brackets Cutting Unique Slots канала BladesIIB
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
SAAB 9-3 Convertible Remove Trim To Access Roof Locking BowFusion Flicker - Set Up Single Origin, Use Multiple Work Offsets & Pattern Parts In Design and CAMTriple"B"S Knife Lock Build Series - Part 4 Finishing The Handle Slabs Tapmatic and ScotchbriteDesigning & Manufacturing Micro Rectangular or Magazine Style Springs - Innovation!Tormach 1100MX V2.x Control Board Swap - Old Red to New Green - ATC USB or Fuse ErrorMAGXact DRO Slide Clean/Repair - One Tiny Chip Scrapped A PartTriple"B"S Knife Lock Build Series - Part 5 Finishing The Blade, Bushing & Back SpacersTriple"B"S Knife Lock Build Series - Part 2 - Knife Making With Fusion 360 & Tormach 1100MXKubota Hydraulic Coupler Guard - Modifying a High Flow Coupler Guard To Fit A Low Flow KubotaPierson Workholding Pallet Rack - Vertical Storage For Pierson Pro Pallets, Fits In Toolbox DrawerStress Testing The Triple"B"S Folding Knife LockHow to Make a Custom Fixed Blade KnifeOperation & Maintenance Of A BladesIIB Triple"B"S Knife LockTormach 1100MX Project - Titanium Eagle/Logo Bottle OpenerTormach 1100MX CNC Project Start to Finish - Designed in Fusion 360 & Built on a TormachDressing a Silicon Carbide Grinding Wheel - Prepping it for sharpening Brazed CarbideLearning Tig Welding Week 1 Progress Check - Dry Arcs. Add Filler Rod Next Week!Custom Brembo Caliper Bracket Part 2 - Heat Treated 4140 - Largest Tormach Part So FarWatching You Cover Fathers Day Chapel RockTriple"B"S Knife Lock Build Series - Part 6 Cover Plates, Etching In Logo & Final AssemblyNew Spare Tire Rack On Trailer - Original Design Did Not Support The Weight