ROCKSHOX Domain R Dual Crown mountain bike fork full service - ROCKSHOX
Hi, Guys! In this video I show you full service of Rockshox mountain bike front fork - Rockshox domain r dual crown! Here we disassemble fork, inspect all parts, change oil seals, repair dust seals, change oil both in the cartridge and in lower legs and of course assemble it.After all operations with fork, we test fork out of bike! Enjoy!
Do all operations shown in this video at your own risk!
Thanks for watching! Hope you enjoy! Rate, comment and SUBSCRIBE for more interesting stuff that I make for You!
Follow me on Twitter https://twitter.com/Axrv88
https://www.facebook.com/AXRV88/
#AXRV88 #ROCKSHOX #service
0:00 Вступление
1:28 Remove oll seals with big flat screwdriver.
1:50 Second seal. Looks not better than first!
2:36 Springs from dust seals must be cleaned and tightened for better performance after years of using.
4:47 Put springs on dust seals. DO NOT twist them. It's tricky!
6:20 Full set of seals. Ready to installation. Black seals are new.
6:50 Disassemble spring leg.
8:39 Spring rod is OK. And threads in it too.
9:26 Let's assemble spring leg!
12:49 Inside look after hot washing with soap.
13:22 How it slides without sand inside? It slides perfect!!!
13:49 Little bit of silicone spray will help us to install seals.
14:25 Install seals with help of 30mm socket. Do it gently.
15:06 Dust seals install by hand.
15:32 Perfect! Look like new!
16:01 Then fill seals with grease and remove excessive grease.
16:43 Be careful, do not damage seals!
17:11 Spring side needs 40ml of 15w oil; Cartridge side needs 10ml of 15w oil.
18:24 Tighten bottom bolts. DO NOT OVERTIGHTENII!
22:23 Don't forget about rebound knob!
Видео ROCKSHOX Domain R Dual Crown mountain bike fork full service - ROCKSHOX канала AXRV88
Do all operations shown in this video at your own risk!
Thanks for watching! Hope you enjoy! Rate, comment and SUBSCRIBE for more interesting stuff that I make for You!
Follow me on Twitter https://twitter.com/Axrv88
https://www.facebook.com/AXRV88/
#AXRV88 #ROCKSHOX #service
0:00 Вступление
1:28 Remove oll seals with big flat screwdriver.
1:50 Second seal. Looks not better than first!
2:36 Springs from dust seals must be cleaned and tightened for better performance after years of using.
4:47 Put springs on dust seals. DO NOT twist them. It's tricky!
6:20 Full set of seals. Ready to installation. Black seals are new.
6:50 Disassemble spring leg.
8:39 Spring rod is OK. And threads in it too.
9:26 Let's assemble spring leg!
12:49 Inside look after hot washing with soap.
13:22 How it slides without sand inside? It slides perfect!!!
13:49 Little bit of silicone spray will help us to install seals.
14:25 Install seals with help of 30mm socket. Do it gently.
15:06 Dust seals install by hand.
15:32 Perfect! Look like new!
16:01 Then fill seals with grease and remove excessive grease.
16:43 Be careful, do not damage seals!
17:11 Spring side needs 40ml of 15w oil; Cartridge side needs 10ml of 15w oil.
18:24 Tighten bottom bolts. DO NOT OVERTIGHTENII!
22:23 Don't forget about rebound knob!
Видео ROCKSHOX Domain R Dual Crown mountain bike fork full service - ROCKSHOX канала AXRV88
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Корсар петарды против канистрыMy video experiments and preview of the next video 😁Yamaha YZ450F First ride 7 the way backMotorcycle brake pads replacement - How-toYZ450F Weekend ride part 1DIY Shimano Brakes UpgradeТест самодельной д#мовая ш@шкаBikeNEWS #1 / ABS system for bicycle 2019VW Golf IV BCA cold startYamaha YZ450F First ride 5Велосипед которому 30 лет 2022 год - BikeNEWSBicycle forest rideMarzocchi 888 actionYZ450F autumn ride 1YZ450F Weekend ride part 4YZ450F autumn ride 2YZ450F Weekend ride part 2vw 1.4 BCA hot idleYamaha YZ450F First ride 3 Field roadYz 2008 brake pads for 14$ - AliexpressYZ450F Weekend ride part 5