Connect Your Raspberry Pi Camera to Jetson Orin Nano Super in Minutes!

Join this channel to get access to perks:
https://www.youtube.com/channel/UCQs0lwV6E4p7LQaGJ6fgy5Q/join

You can use Raspberry Pi Version 2 and Version 3 cameras on the NVIDIA Jetson Orin Nano Super Developer Kit. With the release of JetPack 6.2, you will need to configure the Camera Serial Interface (CSI) connector to work with the camera. In the tutorial video, we connect a couple of V2 cameras to the Orin Nano Super and configure the CSI connectors to make it work!

Many RPi V2 Cameras come with 15 pin ribbon cables. Here we explain how to swap the cable with a 15 pin to 22 pin cable to connect with the Jetson Orin Nano Super. A quick demo follows.

The Orin Nano Super supports IMX219 and IMX477 CSI cameras in the default Jetson Linux and JetPack distribution.

Items in the video:

Samsung EVO 64 GB micro SD card: https://amzn.to/2Z39qBc
Raspberry Pi v2 camera: https://amzn.to/3ZH1Ck6
Camera extension cable: https://amzn.to/3m6nuYj
Waveshare Dual IMX219 Camera Module: https://amzn.to/40YNLGS

As an Amazon Associate I earn from qualifying purchases.
Visit the JetsonHacks storefront on Amazon: https://www.amazon.com/shop/jetsonhacks

Visit the website at https://jetsonhacks.com
Sign up for the newsletter! https://newsletter.jetsonhacks.com
Github accounts: https://github.com/jetsonhacks
https://github.com/jetsonhacksnano
Twitter: http://twitter.com/jetsonhacks

Some of these links here are affiliate links. As an Amazon Associate I earn from qualifying purchases at no extra cost to you.

Видео Connect Your Raspberry Pi Camera to Jetson Orin Nano Super in Minutes! канала JetsonHacks