Restoring the Weirdest Vise Ever Made

In this video, I restore a very unique anvil/vise combo tool. It isn't the most practical tool as the anvil is hollow and cast iron, but it does have a very unique look to it. Check out the video and let me know what you think of the project!

Timestamps:
0:00 Start
0:33 Start of dis-assembly
0:56 Removing the pin from the spindle
1:14 Wire wheeling to remove grime
1:43 Into the Evaporust
1:52 Out of the Evaporust
3:00 The anvil face was destroyed
3:05 Start of grinding the face down
3:35 Cleaning up the edges and the horn
4:29 Smoothing out face using 150 grit flap disk
5:14 Achieving final surface finish
6:22 Wire wheeling any un-finished areas
7:28 Straightening the bent handle
7:59 Wire wheeling all remaining parts
8:43 Smoothing out finish
9:26 Coating in wax to prevent flash rust
9:53 Greasing the nut and slide + Final assembly
10:18 Finished product

Evaporust: https://evapo-rust.com/

Видео Restoring the Weirdest Vise Ever Made канала TRW