40 AWESOME TOOL HACKS

These hacks will help you make repairs in the house, tidy up your garage, clean the apartment, paint the walls, hang out the paintings, and in general - finish everything that you were going to do for a long time.

How to clean rusty tools? Just pour them with cola. When the rust is gone, rinse the tools with water and dry. How to drive a nail without damaging the finger? I will show you three ways: with pliers, with a clothespin and with a comb.

I'll show you a cool trick with a magnet. It will greatly simplify working with a screwdriver and a hammer. Nails and screws will no longer be lost.

Usually after painting the surfaces do you wash the container and paint drops all over the floor for a long time? Your suffering has finally come to an end. I will show you how to solve these problems.

Tricks with a drill.

If earlier you thought that you were able to use a drill, then now you will understand that you didn’t know very much. Drill is a great tool that performs many unexpected functions. You can independently make for it different nozzles, for example from a toothbrush, an emery paper, a sponge and even scissors. And with these nozzles you will clean the tile, mix paint, collect sawdust from the table, polish the surfaces, draw circles, clean pans and toilet, uncork the wine and even peel the fruits and vegetables! You will not believe, but the drill will even help you to use the jack without effort.

I will teach you how to properly seal large holes in the walls and how to screw the screws at the right distance. By the way, unscrew the taut screw is also quite simple. See how to drill perfect holes in fiberboard, how to make holes for dowels of suitable depth, how to unscrew a rusty screw, how to mask the hole here with a nail in the wall.

To prevent dust from falling onto the floor while drilling holes in the ceiling, make a dust collector from a plastic bottle. It’s possible to draw even circles not only with the help of a drill. You can do it with a simple tape measure. And finally, I will show you how to make an organizer for screws from a piece of foam rubber.

Now there will always be order in your garage, and comfort – in your home!

TIMESTAMPS:

1:41 Drill hacks
4:39 How to seal a hole in the wall
6:38 Drill smooth holes in fiberboard
8:13 Unscrew the rusty screw







----------------------------------------------------------------------------------------
Our Social Media:
Facebook: https://www.facebook.com/5Minute.Craf...
Instagram: https://www.instagram.com/5.min.crafts/
Twitter: https://twitter.com/5m_crafts
5-Minute Crafts KIDS: https://goo.gl/PEuLVt
The Bright Side of Youtube: https://goo.gl/rQTJZz
----------------------------------------------------------------------------------------
For more videos and articles visit: http://www.brightside.me/

Music by Epidemic Sound: https://www.epidemicsound.com/ This video is made for entertainment purposes. We do not make any warranties about the completeness, safety and reliability. Any action you take upon the information on this video is strictly at your own risk, and we will not be liable for any damages or losses. It is the viewer's responsibility to use judgment, care and precautions if one plans to replicate.

The following video might feature activity performed by our actors within controlled environment- please use judgment, care, and precaution if you plan to replicate.

Видео 40 AWESOME TOOL HACKS канала 5-Minute Crafts MEN