Making a DIY analog force sensor under quarantine, with the Kontrol Freak.
In this "Kontrol Freak" tutorial video, you can follow along in my efforts to make a high resolution laminated analog pressure sensor similar to an FSR, using velostat material and a Teensy LC. The whole process is unscripted, informal and pretty relaxed.
I talk about voltage dividers and how to improve resolution on these sensors. I make mistakes, then recover, experiment and investigate, and the end result is a pretty decent sensor (although it does drift a lot...)
This kicks off Kontrol Freak series III "Kuarantine Kontrollers".
I have many other Kontrol Freak videos here on the channel: https://www.youtube.com/playlist?list=PLCejzxWlLD_wG1Es_2vJUi7V_FYcZEnFM
See you in the Kontinuum!
Видео Making a DIY analog force sensor under quarantine, with the Kontrol Freak. канала KontinuumLAB
I talk about voltage dividers and how to improve resolution on these sensors. I make mistakes, then recover, experiment and investigate, and the end result is a pretty decent sensor (although it does drift a lot...)
This kicks off Kontrol Freak series III "Kuarantine Kontrollers".
I have many other Kontrol Freak videos here on the channel: https://www.youtube.com/playlist?list=PLCejzxWlLD_wG1Es_2vJUi7V_FYcZEnFM
See you in the Kontinuum!
Видео Making a DIY analog force sensor under quarantine, with the Kontrol Freak. канала KontinuumLAB
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![DIY Pad instrument with pressure sensitive analog soft buttons: The Virus Pad.](https://i.ytimg.com/vi/X-mxTYgY9lQ/default.jpg)
![Nanomade Force Sensing turns any material into a touch and force sensing interface](https://i.ytimg.com/vi/p_tJ4-kCYBA/default.jpg)
![Arduino Prototyping Inputs #31: Force Sensitive Resistor (FSR)](https://i.ytimg.com/vi/_LuvkEGFas8/default.jpg)
![Tutorial: How to make a weighing scale with the HX711, a load cell and an Arduino | UATS A&S #14](https://i.ytimg.com/vi/S12Mp8gDJmI/default.jpg)
![Force Sensing Materials](https://i.ytimg.com/vi/2XiRnoc8ZRo/default.jpg)
![How to use Force Sensing Resistors](https://i.ytimg.com/vi/rTO3U-0Njtw/default.jpg)
![Pressure Pad Lecture - How to make your own](https://i.ytimg.com/vi/SLRYX879Py0/default.jpg)
![Force Sensing Resistor Tutorial](https://i.ytimg.com/vi/AEvyj0lFk1s/default.jpg)
![MAKE presents: The Capacitor](https://i.ytimg.com/vi/ZYH9dGl4gUE/default.jpg)
![My DIY One Wheel Build - The Battery - Part 1](https://i.ytimg.com/vi/hQ6qECzf6zI/default.jpg)
![Make a Flex Sensor for Robotic Hand and Arduino | DIY](https://i.ytimg.com/vi/b7zT94WV-Ek/default.jpg)
![Innovative Printed Electronics and Integrated Capacitive Touch Sensors](https://i.ytimg.com/vi/z9J80pwTE_w/default.jpg)
![Force: Specifications of Piezoelectric 1-Component Force Sensors](https://i.ytimg.com/vi/cHZcKCRYtNM/default.jpg)
![MAKE presents: The Transistor](https://i.ytimg.com/vi/-td7YT-Pums/default.jpg)
![Capacitive sensor, Theory, application and design](https://i.ytimg.com/vi/QItuf6lNvmI/default.jpg)
![DIY MIDI melodica, and the robot I built to test it.](https://i.ytimg.com/vi/hqjX_WpObB0/default.jpg)
![[DIY] HOW TO MAKE PRESSURE PAD (PRESSURE SWITCH) at HOME easily...](https://i.ytimg.com/vi/6PHUcwsseQs/default.jpg)
![DIY onewheel from used hoverboard build video](https://i.ytimg.com/vi/tJ3aADChl2o/default.jpg)
![Tutorial: Op-amp circuit for force sensor signal conditioning](https://i.ytimg.com/vi/VtxFtzWlTgg/default.jpg)
![How To Design An Overdrive Pedal Circuit](https://i.ytimg.com/vi/F-WHBgIowmU/default.jpg)