Honda Monkey 125 MNNTHBX Clutch Lifter Plate Installation
Where to get these parts:
Clutch Lifter Plate - https://mnnthbx.com/product/mnnthbx-clutch-plate-fits-honda-monkey/
EBC 15% Heavy Duty Clutch Springs - https://mnnthbx.com/product/ebc-heavy-clutch-springs-honda-grom/
Where to get these tools:
Clutch Tool - https://amzn.to/3tZ4CKa
Flywheel Holder Tool (similar to Honda genuine tool) - https://amzn.to/3ajzQUu
1/4" Torque Wrench - https://amzn.to/2LMorCX
3/8" Torque Wrench (with 1/2" adapter) - https://amzn.to/3tPfv0O
Oil I use:
Honda Pro HP4S 10W-30 - https://amzn.to/3afuZmX
Don't forget to check out my new Discord Community! We have a good group of people forming there and it's like a giant chat room, pretty neat!
https://discord.gg/yMsZfE3U9a
Hope you enjoy the installation process, it was fairly simple to do and while I used the special tools because I wanted to clean the oil spinner, you might not need to remove the spinner in order to change just the lifter plate and springs. The tools are fairly cheap though, just be sure to purchase a flywheel holder tool that has smaller than 7mm pins, as the one I bought has 7mm & 9mm pins, and they were too big. 5mm pins are what you'll want to look for. I've provided a link to the appropriate flywheel holder tool similar to what is specified the in manual.
Speaking of the manual, this is an extremely helpful tool to have. Maybe the most helpful! I follow the process outlined in the manual for the video, but showed some other steps that I had to take to make things easier, such as taking the rearset off and disconnecting a few things to make that easier.
Be very careful when tightening the small 6mm bolts because they only call for 9 ft/lbs of torque, which is next to nothing and should really be an inch/lb measurement because 9 ft/lbs on a 3/8" torque wrench is so low it doesn't even click! I broke one of the small aluminum side case bolts with the regular 3/8" ratchet, they are really fragile and the OEM bolts aren't much stronger!
Видео Honda Monkey 125 MNNTHBX Clutch Lifter Plate Installation канала John5XR
Clutch Lifter Plate - https://mnnthbx.com/product/mnnthbx-clutch-plate-fits-honda-monkey/
EBC 15% Heavy Duty Clutch Springs - https://mnnthbx.com/product/ebc-heavy-clutch-springs-honda-grom/
Where to get these tools:
Clutch Tool - https://amzn.to/3tZ4CKa
Flywheel Holder Tool (similar to Honda genuine tool) - https://amzn.to/3ajzQUu
1/4" Torque Wrench - https://amzn.to/2LMorCX
3/8" Torque Wrench (with 1/2" adapter) - https://amzn.to/3tPfv0O
Oil I use:
Honda Pro HP4S 10W-30 - https://amzn.to/3afuZmX
Don't forget to check out my new Discord Community! We have a good group of people forming there and it's like a giant chat room, pretty neat!
https://discord.gg/yMsZfE3U9a
Hope you enjoy the installation process, it was fairly simple to do and while I used the special tools because I wanted to clean the oil spinner, you might not need to remove the spinner in order to change just the lifter plate and springs. The tools are fairly cheap though, just be sure to purchase a flywheel holder tool that has smaller than 7mm pins, as the one I bought has 7mm & 9mm pins, and they were too big. 5mm pins are what you'll want to look for. I've provided a link to the appropriate flywheel holder tool similar to what is specified the in manual.
Speaking of the manual, this is an extremely helpful tool to have. Maybe the most helpful! I follow the process outlined in the manual for the video, but showed some other steps that I had to take to make things easier, such as taking the rearset off and disconnecting a few things to make that easier.
Be very careful when tightening the small 6mm bolts because they only call for 9 ft/lbs of torque, which is next to nothing and should really be an inch/lb measurement because 9 ft/lbs on a 3/8" torque wrench is so low it doesn't even click! I broke one of the small aluminum side case bolts with the regular 3/8" ratchet, they are really fragile and the OEM bolts aren't much stronger!
Видео Honda Monkey 125 MNNTHBX Clutch Lifter Plate Installation канала John5XR
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![TB Parts Honda Monkey 125 Performance Exhaust 3 | INSTALLATION | NEW Honda Monkey Exhaust System!](https://i.ytimg.com/vi/Mfzqf94pmio/default.jpg)
![MNNTHBX HONDA MONKEY CLUTCH LIFTER PLATE | What's on the Bench Parts Review Show](https://i.ytimg.com/vi/IDg5is8HQUc/default.jpg)
![Honda Monkey 600-Mile Oil Change | Service Interval Observations](https://i.ytimg.com/vi/cbAdXxSy_yY/default.jpg)
![Honda Grom Top End Build | Honda Grom Big Bore Kit Installation | Partzilla.com](https://i.ytimg.com/vi/6Awk0ejj5-4/default.jpg)
![DID YOU KNOW ABOUT THIS STUFF ON THE HONDA TRAIL 125/CT-125/Hunter Cub? | Hidden features and tricks](https://i.ytimg.com/vi/ftdYjrSBrm0/default.jpg)
![HONDA MONKEY 125 : ตั้งโซ่ และ ทำความสะอาดโซ่ขับเคลื่อน ! 105 บาท แพงมั้ย ?](https://i.ytimg.com/vi/JqT0iYe2IkU/default.jpg)
![TB Monkey 125 Performance Exhaust 3 | THE ULTIMATE SOUND TEST (plus some rad MX track action!)](https://i.ytimg.com/vi/zLgjLuSyXGQ/default.jpg)
![Honda Trail 125 Inside Look! | Brakes, Wheels, and Tires Walkaround | New CT-125 Overview Videos](https://i.ytimg.com/vi/7L7_hP9YKV4/default.jpg)
![CHP Performance Exhaust & Heat Shield on the 1974 CT70](https://i.ytimg.com/vi/_6PXmO9YAUI/default.jpg)
![Honda Monkey 125 1000km oil change and clean the oil centrifugal filter 首1000公里更換偈油、清潔離心器及油格網](https://i.ytimg.com/vi/tMRGa_xXeYE/default.jpg)
![Honda Monkey modifications: Should you change to a 14t front sprocket?](https://i.ytimg.com/vi/ehJcG8AOxQs/default.jpg)
![Monkey 125 First 600 Mile Oil Service & Oil Spinner clean-out - LONG VIDEO!](https://i.ytimg.com/vi/Wosjdxz_ceQ/default.jpg)
![2019 Honda Monkey MNNTHBX Mtake Intake System Install](https://i.ytimg.com/vi/P_2plu5fr-A/default.jpg)
![Honda Monkey Bike Cheapest Air Intake Mod Performance mph Review](https://i.ytimg.com/vi/VI6iH9dFHxU/default.jpg)
![Check out these Cool Honda Monkey Parts!](https://i.ytimg.com/vi/nlVZ1rtW6jE/default.jpg)
![Best Honda Monkey Upgrade! 14T Counter-shaft Sprocket Installation and Ride Report 70 mph!](https://i.ytimg.com/vi/NyGKzwM50gk/default.jpg)
![HONDA TRAIL 125 HUNTER CUB FIRST RIDE REVIEW | How does it handle backroad riding?](https://i.ytimg.com/vi/1dVEOK7Ji4g/default.jpg)
![2019 Honda Monkey Build: TB Parts Cam Overview and Install](https://i.ytimg.com/vi/sDYinv1cUaE/default.jpg)
![Honda Monkey Walkaround REVISITED! The Mods, The Likes, The Dislikes. INFO OVERLOAD!!](https://i.ytimg.com/vi/fyXgFCSaX1c/default.jpg)
![Honda Monkey 125 độ hơn 200 triệu | Review xe | F.O.X Gromer](https://i.ytimg.com/vi/vBjJzOvAbtc/default.jpg)