Spektrum Quick Hit Tech Tip - Binding Basics and Troubleshooting

In this video, Tom goes over some of the important fundamentals of binding a Spektrum Receiver to your Spektrum Radio. If you are having trouble binding, your issue may very well be resolved by watching this video! If not feel free to comment below and we can make suggestions.

The Tips in this video are...
- Make sure your Receiver (RX) and Transmitter (TX) are compatible! Surface rxs are only for surface radios and vice versa for air.
- Check the protocol/modulation type of your devices! Many older receivers are obsolete and do not work with newer tech. The Spec chart on the devices product page and manual will help you clarify.
- Make sure when you bind that the rx and tx are at least 1 meter apart! Too close and the bind will fail.
- Make sure you have adequate power to your receiver! A week power source or dead rx battery can cause binding issues.
- Check your polarity! It is possible to plug in a Servo/ESC/Battery lead in backwards to your rx. This will cause the rx to not operate or bind
- IF using AS3X, SAFE or AVC, make sure you allow the rx to initialize propperly. This means putting the model down on its wheels and motionless for a short period of time.

Also we encourage you, the RC community, to give us suggestions on more quick hit tech tip videos! What do you need help with or what have you found fixed what you think could be a common mistake? Let us know!

Thanks for watching!

Make sure to follow us on Facebook and Instagram for all Spektrum News and Promotions!
https://www.facebook.com/SpektrumRC/
https://www.instagram.com/spektrum_rc/
@SpektrumRC

Видео Spektrum Quick Hit Tech Tip - Binding Basics and Troubleshooting канала SpektrumRC