Evolis Primacy 1 | Advanced print head cleaning

To deep clean the print head of the Evolis Primacy 1 card printer follow the instructions below:
Maintenance accessory: Evolis cleaning pen

1. Remove the cover from the cleaning pen
2. Unplug the power supply cable, open the cover then find the print head.
3.Gently rub the pen from left to right along the print head for a few seconds.
3. Close the cover. Reconnect the printer

Wait 2 minutes before using the printer until the cleaning product has fully evaporated.

Find the consumables adapted to your product: https://myplace.evolis.com/s/product/primacy/01t5p00000CXScMAAX?language=en_US&tabset-4085f=6be13
Contact us to find the nearest Evolis dealer: https://myplace.evolis.com/s/consumables-form-page?language=en_US

Recommended cleaning cycle: every 5 routine cleaning cycles
Use of the cleaning pen is recommended every 5 regular cleans. This can be used up to 8 times for cleaning the print head.

To prevent any effect on the printing quality or permanent damage of the print head, please avoid:
- any contact between the print head and any metal or sharp objects.
- touching the print head directly with your fingers
- any discharge of static electricity.

Видео Evolis Primacy 1 | Advanced print head cleaning канала Evolis Support