DIY 3D Printed CNC. MultiBot CNC v2 build video part 5
This is the fifth video in a series that will show how I build a DIY 3D printed CNC. The project is downloadable on Thingiverse here: https://www.thingiverse.com/thing:4645791
More limit switches and wiring... I show the first revision of my custom wire management for the Multibot CNC.
The Arduino is finally here and I spend the better parts of two weeks troubleshooting simple problems.
Tired of waiting, I just order the Arduino with older drivers from Amazon so I can continue the build.
There are several parts that may leave you with questions; please leave them in the comments and I'll answer.
In a later video I plan to talk about things like why a CNC instead of a laser, and why this project instead of others, and other topics one needs to consider before and while building a CNC. Please stay tuned!
Subscribe and hit the bell if you enjoy these videos.
Thanks for watching.
Some of the extra items I bought while troubleshooting EMI issues I had. You may want to consider starting off with just the Optocoupler Isolation Board. Can use old ethernet cabling for limit switch extenders. the spiraled wires are good for EMI.
4-Channel Optocoupler Isolation Board:
https://smile.amazon.com/gp/product/B07GMHLL2M/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Voltage Step Down Buck Converter Board: (to get 12V fan power from 24V power supply)
https://www.amazon.com/gp/product/B0758ZTS61/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Shielded limit switch cabling: (I needed 3, got 2)
https://smile.amazon.com/gp/product/B01LNH8POQ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Shielded stepper motor cabling: (hard to get into small JST connectors)
https://smile.amazon.com/gp/product/B07T951L58/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Ratchet tool and limit switch connectors:
https://smile.amazon.com/gp/product/B082234HSS/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Stepper motor connector kit:
https://smile.amazon.com/JST-PHR-Connector-Female-Housing-Adapter/dp/B07L3GL995/ref=sr_1_1_sspa?dchild=1&keywords=2.0mm+JST-PH+Connector+Kit&qid=1615059780&s=electronics&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFYQTVFR1NDMUlFSEEmZW5jcnlwdGVkSWQ9QTA3OTUzMTMySFhTTVVXM0MwSDcwJmVuY3J5cHRlZEFkSWQ9QTA1MzMyNDQ2REJBRk80M0ZIVkMmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
Видео DIY 3D Printed CNC. MultiBot CNC v2 build video part 5 канала Random Projects with Sam
More limit switches and wiring... I show the first revision of my custom wire management for the Multibot CNC.
The Arduino is finally here and I spend the better parts of two weeks troubleshooting simple problems.
Tired of waiting, I just order the Arduino with older drivers from Amazon so I can continue the build.
There are several parts that may leave you with questions; please leave them in the comments and I'll answer.
In a later video I plan to talk about things like why a CNC instead of a laser, and why this project instead of others, and other topics one needs to consider before and while building a CNC. Please stay tuned!
Subscribe and hit the bell if you enjoy these videos.
Thanks for watching.
Some of the extra items I bought while troubleshooting EMI issues I had. You may want to consider starting off with just the Optocoupler Isolation Board. Can use old ethernet cabling for limit switch extenders. the spiraled wires are good for EMI.
4-Channel Optocoupler Isolation Board:
https://smile.amazon.com/gp/product/B07GMHLL2M/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Voltage Step Down Buck Converter Board: (to get 12V fan power from 24V power supply)
https://www.amazon.com/gp/product/B0758ZTS61/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Shielded limit switch cabling: (I needed 3, got 2)
https://smile.amazon.com/gp/product/B01LNH8POQ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Shielded stepper motor cabling: (hard to get into small JST connectors)
https://smile.amazon.com/gp/product/B07T951L58/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Ratchet tool and limit switch connectors:
https://smile.amazon.com/gp/product/B082234HSS/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Stepper motor connector kit:
https://smile.amazon.com/JST-PHR-Connector-Female-Housing-Adapter/dp/B07L3GL995/ref=sr_1_1_sspa?dchild=1&keywords=2.0mm+JST-PH+Connector+Kit&qid=1615059780&s=electronics&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFYQTVFR1NDMUlFSEEmZW5jcnlwdGVkSWQ9QTA3OTUzMTMySFhTTVVXM0MwSDcwJmVuY3J5cHRlZEFkSWQ9QTA1MzMyNDQ2REJBRk80M0ZIVkMmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
Видео DIY 3D Printed CNC. MultiBot CNC v2 build video part 5 канала Random Projects with Sam
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MicroSwiss All Metal Hotend Kit Install on my CR-10Sam Builds a Drill PressI wanna go fasterMultibotRail cnc end-stop issues!DIY 3D Printed CNC. MultiBot CNC v2 build video part 8Kids Work Bench Top finishIM40 Filter Sock Cup improvements!WPL C24 upgrades! Full compliment of tracks!DIY Filament Box for 3D printing with PETGAuto Christmas Tree Waterer 2 (Auto Top Off System)Tetra x1 Motor Replacement & LED repairSam's Track Suit...Outdoor Table Refinish Part DeuxSam Builds an RC Jet BoatFishEp3 LetsRockBLTouch on Extended Ender makes all the difference! Marlin 2.1.2 compiles for GD32 drivers!Garage Door FixSam feeds his Emperor AngelfishPedal Cart RehabProjects with Sam RAW - After the Crash!Original JRX2 Rehab - Sam repowers his over 30 year old RC car