How to move an electrical outlet behind the TV - How to Mount a TV to the Wall part 3
http://youdoav.com/ For best results watch in HD 1080P
How to move an electrical outlet over 4 studs
0:47 Boom – The wire is in.
What you need – A cut in box
1:50 Tip – do not knock the tabs out.
Take your time it is just getting the wire into the cut in box one at a time.
4:26 Secure the box to the wall by tightening the screws on the box.
Tools needed – Screw driver
Tools needed – wire strippers.
5:55 ground the wires
Tools needed – linesman’s plyers – make a linesman’s splice
What you will need – Ground Clamp
Tools needed – Crimping tool
8:00 – Crimp the ground clap.
What you will need – Plug box
9:00 “I am not a paid actor I am a real installer”
9:20 How to make a whip:
You will need Wire Nuts (I like Red).
9:45 Line up the black wires and twist on the red wire nut.
10:03 Tuck the red wire nut cap into the box.
10:26 Do the same thing for the white wires.
11:30 Twist on the Red wire nut. When the wire begins to twist together is when the wire nut is tight enough.
12:02 Cut the whips to length – about 4 to 5 inches long out of the box.
12:26 Bend hook on end.
12:58 White wire goes on silver and black wire goes on gold – ground on the bottom green screw.
Tip when you tighten the screws you want the hook to get sucked into the outlet.
13:52 Pro Tip – Tighten all of the screws on the outlet just to make sure that there is no risk of a short.
14:02 Push in side of the box. Take your time and make sure that the ground wire is not touching any of the other screws.
14:33 Tighten the screws to the box.
14:49 Make sure the outlet stays straight.
15:18 Put face plate on.
16:00 Outlet behind TV
What you need – cut in box
17:05 Strip the cable – bit the end with your stripers pull the outer white jacket cut off excess paper and cover – Cut the wire to a length about 4 inches out of the box. Strip and hook the wire.
Note this is a recessed electrical outlet.
18:56 – Who knows who did what with these screws and then put them in your mouth.
20:30 Drilling blindly tips
Put the TV on the wall
21:20 Plug it in first.
21:44 This step may require 2 people. (Thanks Joey)
22:00 Lock the TV to the wall mount.
22:40 Zip tie the power cable to the back of the TV.
24:45 Remember all installation are different.
Видео How to move an electrical outlet behind the TV - How to Mount a TV to the Wall part 3 канала Alan Clegg
How to move an electrical outlet over 4 studs
0:47 Boom – The wire is in.
What you need – A cut in box
1:50 Tip – do not knock the tabs out.
Take your time it is just getting the wire into the cut in box one at a time.
4:26 Secure the box to the wall by tightening the screws on the box.
Tools needed – Screw driver
Tools needed – wire strippers.
5:55 ground the wires
Tools needed – linesman’s plyers – make a linesman’s splice
What you will need – Ground Clamp
Tools needed – Crimping tool
8:00 – Crimp the ground clap.
What you will need – Plug box
9:00 “I am not a paid actor I am a real installer”
9:20 How to make a whip:
You will need Wire Nuts (I like Red).
9:45 Line up the black wires and twist on the red wire nut.
10:03 Tuck the red wire nut cap into the box.
10:26 Do the same thing for the white wires.
11:30 Twist on the Red wire nut. When the wire begins to twist together is when the wire nut is tight enough.
12:02 Cut the whips to length – about 4 to 5 inches long out of the box.
12:26 Bend hook on end.
12:58 White wire goes on silver and black wire goes on gold – ground on the bottom green screw.
Tip when you tighten the screws you want the hook to get sucked into the outlet.
13:52 Pro Tip – Tighten all of the screws on the outlet just to make sure that there is no risk of a short.
14:02 Push in side of the box. Take your time and make sure that the ground wire is not touching any of the other screws.
14:33 Tighten the screws to the box.
14:49 Make sure the outlet stays straight.
15:18 Put face plate on.
16:00 Outlet behind TV
What you need – cut in box
17:05 Strip the cable – bit the end with your stripers pull the outer white jacket cut off excess paper and cover – Cut the wire to a length about 4 inches out of the box. Strip and hook the wire.
Note this is a recessed electrical outlet.
18:56 – Who knows who did what with these screws and then put them in your mouth.
20:30 Drilling blindly tips
Put the TV on the wall
21:20 Plug it in first.
21:44 This step may require 2 people. (Thanks Joey)
22:00 Lock the TV to the wall mount.
22:40 Zip tie the power cable to the back of the TV.
24:45 Remember all installation are different.
Видео How to move an electrical outlet behind the TV - How to Mount a TV to the Wall part 3 канала Alan Clegg
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pro TV Install 2/3: Run/hide cables in the wall like a proHow To Add an Electrical Outlet | Move Outlet Up Wall | Wall Mounted TV | Hide Wires Easy!!How to Mount a TV to the Wall and move an Outlet Part 1Add an Outlet to an Existing CircuitEasy drywall ceiling patchHow to Add an Electrical outlet in an Existing WallHow To Hide Your TV Wires in 30 Minutes - DIYHow to Add an Electrical Outlet for a Wall Mounted TVHow to Move an Electrical outlet behind the TV - Mounting a TV to the Wall Part 2How to Mount 80+ inch TV to Wall & Hide Wires Step by Step Samsung Q903 EASY WAYS TO HIDE WIRES CABLES IN WALL & FIND STUDSIncorrectly Wired Outlet Found In Newly Built Homehow to wire an outlet off of a switchHow to Hide TV Wires | Code Compliant TV WiringFixing Ungrounded Outlets - An Alternative Option to Rewiring Your HomeHow To Hide TV Wires In Wall By A Pro InstallerHow To Install Power And HDMI Wires In The Wall For a Flat Screen TV | THEHANDYMAN |Relocating An Electrical OutletHow To Hide Your TV Wires for a Wall Mounted TV!The secret pros use to hide wires in the wall