Antique Rusty Pruning Saw - Restoration? I Make a New One

This old rusty and broken pruning rip saw was sent to me by a follower on Instagram. He was on a mission to clean the Swiss Alps from trash. They removed around two tons of trash in total. At the Albert-Heim-Hut, which was built in 1918, he found this old pruning saw. It must have been digged into the ground for decades. It was in a terrible condition to say the least. The handle was missing half of it and the wood was rotten. The blade looked very bad, it had very thick layers of rust and dirt on it.

Right when I saw this saw for the first time on a picture I knew this will be a very difficult project. It was very obvious that I need to replace the handle, the question was if I could possibly save the blade. Because otherwise there would be nothing left from the original saw after the restoration. After sandblasting it was very clear right away that the damage on the blade is beyond repair. Rust has eaten away a lot of material, some teeth were missing and there was heavy pitting all over the blade. I thought for a few days what I want to do with this project. Should I trash it and start something new, or should I keep going and replace what needs to be replaced, even though there would only two brass plates stay from the original saw. I also asked this question to my Patreon and channel members and the answer was a very clear „yes, keep going“. And that's what I did.

For the blade I choose a stainless high carbon steel (1.4116). As the original teeth had no offset, it was very easy to make a new one. Therefore was the blade tapered, I managed to achieve that with a file. For the hardening I wraped the blade in stainless steel foil, heat it up to 1050°C for a good 20 minutes and then quench in preheated (60°C) oil. I only made one tempering cycle right after the quench in a bakeoven for 2 hours at 250°C. I didn't want the blade to be too hard so it can still stay felxible.

I decided to make the handle out of smoked oak. It's a very common wood in Switzerland. That was my first time working with this type of wood and I loved it. Its hardness made it very nice to work with. The dark color fits perfectly with the brass.

I think this project is a very good example of the ship of Theseus. Even though there are just two parts left from the original saw, you could say this is a new saw and others might say it's still the old one just restored/repaired. For me this is clear, it still is the old saw. What happens if the handle of your saw breaks? You'll replace it and it's still your saw.
What happens if the blade breaks short after? You'll replace it and it's still your saw.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:
Tonya M Broerman
Adel AlSaffar
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Courtney Maleport
David Barker
Diecast Pirate
Greg Marston
Lambda GPU Workstations
Luke Schmick
Matt Bosch
Mellissa Marcus
Muzaffer Aksoy
Paul Mampilly
Todd Medbury
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Alex Breton
alex latzko
Alex Shipley
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Easy Green
Grok Senften
Haley McFadden
Harper Kim
Hunter R.
Jeremy Cole
Jessica Alexander
Jonas Richartz
Jordan Page
justin f.
Kelly Imgrund
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Paul Ambry
Scott Marshall
Stuart Mitchell
Suiros
The Carlsons
Trevor Kam
Tucker Ifft
Warren G Strand Jr
William Wallace
XL S
웅록 윤
Time and costs of this project:

$5 steel for the blade 1.4116
$2 smoked oak (wood)
$50 dovetail mill for saw teeth
Thank you for watching :-)
„I make a new one“ T-Shirts:
https://teespring.com/stores/my-mechanics

My Main Channel:
https://www.youtube.com/c/mymechanics

My Second Channel:
https://www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
https://www.patreon.com/mymechanics

Follow me on Instagram:
https://www.instagram.com/my_mechanics/

My Facebook Page:
https://www.facebook.com/My-mechanics-1966277857002099/

Видео Antique Rusty Pruning Saw - Restoration? I Make a New One канала my mechanics