Restoration Rusty Knife For My Workshop

Hello folks! Today I want to show you my new restoration project. I bought this shape of rusty knife at a flea market. This is tool steel, its good stuff. I decided to make a knife for my workshop. Usually I need knife for leather, wood for some other stuff knife.

0:00 Review
0:27 Rust remover
0:47 Washing
1:06 Drying oiling
1:13 Beltgrinder
1:38 Knife bevels
1:47 Sandpaper work
2:01 Tempering
2:15 Drilling holes
2:26 Hardening
2:59 Final correction
3:11 Handle
4:12 Gluing
4:47 Woodworking
5:33 Impregnated
5:42 Sharpening
6:06 Checking sharpness
6:25 Bluing
6:41 Final review
7:08 Test

I used rust remover as usual and washed it and impregnated. The shape of father knife I cleaned via iron wire brush and the corrected the shape. Bevels of knife also made on belt grinder machine. For the handle of the knife, I chose a piece of wood mahogany. The pins are steel. After sharpening the knife, I made an etching of the blade so that there was no rust. And as usual, an interesting and delicious test for you! I hope, you will enjoy this restoration video.

Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: https://www.patreon.com/Screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: https://www.facebook.com/scresandtools/
Instagram: https://www.instagram.com/screwsandtools/

#screwsandtools #knife #restoration

Видео Restoration Rusty Knife For My Workshop канала Screws And Tools