Hinderer XM-18 Regrind
Thanks for watching guys. I apologize for the low volume when I am talking, my gopro isn't the best at recording audio and I had head phones on so I was talking quiet.
Видео Hinderer XM-18 Regrind канала BGM Knives
Видео Hinderer XM-18 Regrind канала BGM Knives
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Flat grinding a jv3 kwaiken.](https://i.ytimg.com/vi/1vXu5_il5Xs/default.jpg)
![Making a J-V Kephart(Build-Video)](https://i.ytimg.com/vi/G9wxzyHNEYo/default.jpg)
![Making A Rambo Type Knife(build-video)](https://i.ytimg.com/vi/x8uscDpt3Es/default.jpg)
![Foil wrapping tool steels and stainless steels.](https://i.ytimg.com/vi/tgYlbr9Tw20/default.jpg)
![Polymer 80 Lower/Live Free Armory Slide Water Submersion Test](https://i.ytimg.com/vi/7H54CCxSgdM/default.jpg)
![(CUT TEST) JV-7 SPADE](https://i.ytimg.com/vi/LUX7bNBMAls/default.jpg)
![Impact test on my paracord wraps](https://i.ytimg.com/vi/_AQ7XufLM20/default.jpg)
![Vaer Watches D4 Atlantic vs D4 Black Merdian](https://i.ytimg.com/vi/RehiQc79m5Y/default.jpg)
![Spartan Blades Enyo S35VN (pounded through 16 gauge sheet-metal)](https://i.ytimg.com/vi/KJY9qxgXT64/default.jpg)
![Norse Tomahawk (Build-Video)](https://i.ytimg.com/vi/-vO0x-Qais8/default.jpg)
![Batoning with the Spade model.](https://i.ytimg.com/vi/nLkCAhdP0YM/default.jpg)
![3v lateral toughness test.](https://i.ytimg.com/vi/4BAjd1uoBQI/default.jpg)
![How I wrap my JV-3 kwaikens](https://i.ytimg.com/vi/YzyZArRZB7c/default.jpg)
![m4 steel toughness test.](https://i.ytimg.com/vi/gMb12KYO5bg/default.jpg)
![grinding some bevels](https://i.ytimg.com/vi/wC8WgWMjnko/default.jpg)
![AEB-L @61.5hrc (edge retention test)](https://i.ytimg.com/vi/fjbvhiC4l5c/default.jpg)
![Polymer 80 Cold Weather Test](https://i.ytimg.com/vi/4Q2b7FQTrd8/default.jpg)
![MDX Arms Build Kit (Live Free Armory Slide) P80 G19 TEST](https://i.ytimg.com/vi/881aNmib4a4/default.jpg)
![MDX Arms Build Kit (Live Free Armory Slide) 1K Round Update](https://i.ytimg.com/vi/WrcaEKfU9Rs/default.jpg)
![Fixing The Dust Cover Sag On A Polymer 80](https://i.ytimg.com/vi/aJsu5KBFjiE/default.jpg)