Suspension Part 1: Design
In this episode, I summarize the design of the suspension. The car uses a lot of parts from an old VW Beetle which puts a limit on how good the vehicle dynamics may be in much the same way that a restrictor plate limits an engines performance. There are still some things which may be done to improve it and that's what will be covered.
How to Build a Racing Car follows the design and construction of the FVT05, a car built for the Australian Formula Vee racing series. The introduction can be found at https://youtu.be/4gzjcimjfTQ.
Support this project on Patreon:
https://www.patreon.com/thomsenmotorsport
Partners:
Intercad (http://intercad.com.au/) who provided Solidworks for this project.
JKF Aero (https://jkfaero.com/) who assisted on the design of the bodywork and undertray.
Also follow the project at:
https://www.facebook.com/thomsenmotorsport
https://twitter.com/ThomsenRacecar
VW Beetle Picture:
By Jeremy from Sydney, Australia (Volkswagen Beetle Herbie) [CC BY 2.0 (http://creativecommons.org/licenses/by/2.0)], via Wikimedia Commons
Music:
Licenced from Epidemic Sound (http://www.epidemicsound.com)
Видео Suspension Part 1: Design канала ThomsenMotorsport
How to Build a Racing Car follows the design and construction of the FVT05, a car built for the Australian Formula Vee racing series. The introduction can be found at https://youtu.be/4gzjcimjfTQ.
Support this project on Patreon:
https://www.patreon.com/thomsenmotorsport
Partners:
Intercad (http://intercad.com.au/) who provided Solidworks for this project.
JKF Aero (https://jkfaero.com/) who assisted on the design of the bodywork and undertray.
Also follow the project at:
https://www.facebook.com/thomsenmotorsport
https://twitter.com/ThomsenRacecar
VW Beetle Picture:
By Jeremy from Sydney, Australia (Volkswagen Beetle Herbie) [CC BY 2.0 (http://creativecommons.org/licenses/by/2.0)], via Wikimedia Commons
Music:
Licenced from Epidemic Sound (http://www.epidemicsound.com)
Видео Suspension Part 1: Design канала ThomsenMotorsport
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Suspension Part 2: Build](https://i.ytimg.com/vi/pYlpTkIpNj0/default.jpg)
![The Incredible F1 Suspension So Good It Was Banned](https://i.ytimg.com/vi/sRB9T2ACPRI/default.jpg)
![How a car suspension system works?](https://i.ytimg.com/vi/DKql4Is8Pas/default.jpg)
![Intro to Racecar Engineering: 01 Getting Started](https://i.ytimg.com/vi/iIKHocge9Sc/default.jpg)
![](https://i.ytimg.com/vi/i8yB6SWe9Z0/default.jpg)
![Mercedes Project ONE Suspension - Explanation and Analysis](https://i.ytimg.com/vi/8js55jE2da0/default.jpg)
![First Drive!](https://i.ytimg.com/vi/ItPbgC3rKRY/default.jpg)
![Suspension Geometry - Part 1 (Camber, Toe, Caster, KPI, Scrub Radius)](https://i.ytimg.com/vi/VbReLNi2JP4/default.jpg)
![Intro to Racecar Engineering: 05 Suspension Design](https://i.ytimg.com/vi/cp_80EaHndc/default.jpg)
![How Does Formula E's Push-Rod Suspension Work?](https://i.ytimg.com/vi/IdvJtOjCnW4/default.jpg)
![Suspension Geometry - Part 2 (Roll Center, Double Wishbone, MacPherson Strut)](https://i.ytimg.com/vi/oh535De4hKg/default.jpg)
![Suspension SolidWorks Tutorial](https://i.ytimg.com/vi/fEJMEvCKMCs/default.jpg)
![Engine Block Casting Production - Car Factory CNC Lathe ⚙ ASMR](https://i.ytimg.com/vi/PDF59yXYAqo/default.jpg)
![F1 Suspension pt 1 - the Basics: Pushrod, Pullrod, Dampers, Torsion Bars](https://i.ytimg.com/vi/zRvKW4JDyl4/default.jpg)
![Intro to Racecar Engineering: 04 Chassis Design](https://i.ytimg.com/vi/G-p4GFL-F4E/default.jpg)
![Dyno Day](https://i.ytimg.com/vi/FFExxNFkK2M/default.jpg)
![Suspension System Components](https://i.ytimg.com/vi/AVsBgoU88MU/default.jpg)
![Suspension: Camber, Caster, KPI, Scrub radius, Arckerman, Cantilever, Pitch & Roll center](https://i.ytimg.com/vi/tc-80oRTKk0/default.jpg)
![Bodywork Part 3: Bog, Sand, Paint and Mould](https://i.ytimg.com/vi/wgdBNWy3kk0/default.jpg)
![Making a Custom Multi Link Suspension / 5 Link - E55 ASL Part 12](https://i.ytimg.com/vi/dR59yG8S9GQ/default.jpg)