How to Replace a Deck Post | This Old House
Shoring up an old deck with new supports with This Old House general contractor Tom Silva. (See below for a shopping list and tools.)
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Tom Silva and Kevin O'Connor replaced several wooden 4x4 posts that were supporting an exterior deck. The posts, which were not pressure-treated, sat directly on top of concrete piers. They had completely rotted at the bottom due to moisture wicking up through the concrete. Before removing the old posts, Tom & Kevin installed temporary bracing using 2x4's and a sledge hammer. With the deck temporarily supported, they removed the old posts and installed new pressure-treated ones. They also installed a galvanized steel post base at the bottom of each post, eliminating direct contact with the concrete piers.
Shopping List for for Replacing a Deck Post:
- 2x4s, for making temporary posts
- pressure-treated 4x4s, used as posts
- pressure-treated 2x4s, to make diagonal braces
- metal post base and expansion anchor, used to secure the post to the pier
- 3-inch decking screws, used to attach diagonal bracing
Tools for Replacing a Deck Post:
- hammer
- reciprocating saw
- pry bar, for pulling nails
- hammer drill fitted with 1/2-inch-diameter masonry bit, used to bore anchor holes in concrete piers
- impact wrench, for tightening expansion anchors
- miter saw
- small sledgehammer
- impact driver
Resources:
Pressure-treated 4x4 posts are available in home centers and professional lumberyards.
The galvanized steel post bases were manufactured by Simpson Strong-Tie [https://www.strongtie.com/].
The wedge-type concrete anchors were manufactured by RED HEAD Anchoring Systems [http://www.itwredhead.com/].
Looking for more step by step guidance on how to complete projects around the house? Join This Old House INSIDER to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/streaming-app
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Replace a Deck Post | This Old House
https://www.youtube.com/user/thisoldhouse/
Видео How to Replace a Deck Post | This Old House канала This Old House
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Tom Silva and Kevin O'Connor replaced several wooden 4x4 posts that were supporting an exterior deck. The posts, which were not pressure-treated, sat directly on top of concrete piers. They had completely rotted at the bottom due to moisture wicking up through the concrete. Before removing the old posts, Tom & Kevin installed temporary bracing using 2x4's and a sledge hammer. With the deck temporarily supported, they removed the old posts and installed new pressure-treated ones. They also installed a galvanized steel post base at the bottom of each post, eliminating direct contact with the concrete piers.
Shopping List for for Replacing a Deck Post:
- 2x4s, for making temporary posts
- pressure-treated 4x4s, used as posts
- pressure-treated 2x4s, to make diagonal braces
- metal post base and expansion anchor, used to secure the post to the pier
- 3-inch decking screws, used to attach diagonal bracing
Tools for Replacing a Deck Post:
- hammer
- reciprocating saw
- pry bar, for pulling nails
- hammer drill fitted with 1/2-inch-diameter masonry bit, used to bore anchor holes in concrete piers
- impact wrench, for tightening expansion anchors
- miter saw
- small sledgehammer
- impact driver
Resources:
Pressure-treated 4x4 posts are available in home centers and professional lumberyards.
The galvanized steel post bases were manufactured by Simpson Strong-Tie [https://www.strongtie.com/].
The wedge-type concrete anchors were manufactured by RED HEAD Anchoring Systems [http://www.itwredhead.com/].
Looking for more step by step guidance on how to complete projects around the house? Join This Old House INSIDER to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/streaming-app
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Replace a Deck Post | This Old House
https://www.youtube.com/user/thisoldhouse/
Видео How to Replace a Deck Post | This Old House канала This Old House
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How i Replace Rotting Supports Beam and Posts under Deck. Замена опоры под террасойHow to Safely Attach a Deck to a House | This Old HouseHow to Cut a Pass-Through in a Load Bearing Wall | Ask This Old HouseFixing Rotted Deck PostsHow to Repair a Damaged Carrying Beam | Ask This Old HouseOptions for Fastening Deck Posts to Footings2x4 Becomes a Jack - Cool TrickHow To Jack Up Your HouseHow To Repair Rotted Door JambsHow to Run Underground Power to a Shed | Ask This Old House5 Tips for Building a Durable DeckHow to Repair a Rotted Porch Post | Ask This Old HouseHow to Build a Timber Retaining Wall | This Old HouseHow To Replace Deck Handrails (Easy Tips For Replacing Deck/Porch Handrails + Railings!)How to Replace a Rotted Fence Post | This Old HouseDeck Footing OptionsHow to Build a deck- DIY Style -in 3 days Step by step Beginners guideWhy do decks collapse?How to Install and Flash a Deck Ledger, Start to FinishHow to Pour a Concrete Deck Footing | This Old House