DIY POR 15 - How To Prep Rust Before Applying POR15

For Auto Body and Paint Supplies visit http://www.CollisionBlast.com/Supplies For FREE access to training at http://CollisionBlast.com DIY Por 15 Part 1 - How To Prep Rust Before Applying POR 15 using Marine Clean and Metal Ready.

For rusted metal, such as the floor board on this mustang, there are two options when prepping for POR 15. The first option, I am going to demonstrate in this video. The second option is to have the metal blasted to bare metal.

MARINE CLEAN is a complex mixture of organic & inorganic chemicals. It is non-toxic, biodegradable, water-based, and has no noxious odors nor chlorinated solvents. It doesn't contain any petroleum products and has no flash point. Marine Clean repre- sents a revolutionary breakthrough in cleaners, degreasers and dispersants.

Use MARINE-CLEAN for cleaning and degreasing machinery parts, turbine blades, diesel engines, compressors, transformers, bulkheads, deck plates, bilge areas; removal of oily deposits found in closed systems such as air conditioning, boiler tubes, compressor lines, heat exchangers and coils; removal of light distillates, mineral oils, heavy grease, degreasing all metal surfaces, plastics, wood, fiberglass, painted surfaces. Always wear eye protection and rubber gloves when using Marine Clean.

PREP & READY provides the best adhesion for POR-15® on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15®, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe PREP & READY to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® or any other paint. PREP & READY is not caustic, corrosive, toxic or flammable

Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision

Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6

Join me on Twitter at http://Twitter.com/DonnieSmith7

Join our Facebook page at http://Facebook.com/CollisionBlast

For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com

Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.

Music
Licenced track: Michael Conn "Dare"
Cuesongs.com

Видео DIY POR 15 - How To Prep Rust Before Applying POR15 канала Car Addict Garage