Atomstack P9 with new generation 10W diode laser module
Atomstack P9 is smaller version from the Atomstack laser engraver family, but it is equipped with strongest, 10W laser module. Two 5W lasers are concentrated into one beam with results very strong cutting (and engraving) power. This is my first 10W laser engraver, I am still learning new settings. I also tested it's compatibility with Rotary Roller for engraving cylindrical objects.
Atomstackofficial: https://bit.ly/3INLg1j
Tested engraver, Atomstack P9: https://www.atomstackofficial.com/products/atomstack-p9-m50-portable-laser-engraver
Mentioned in the video:
Rotary roller review video: https://youtu.be/eM9WyXwsJsI
R3 Rotary roller provided by Banggood: https://www.banggood.com/custlink/GD3ds2Y7zp
Air assist: https://www.banggood.com/custlink/KKvEQULuQS
Contents:
0:00 Introduction
1:31 Unboxing
3:44 Assembling
9:06 Engraving from SD card (factory code)
9:45 Engraving from SD card (own code)
11:05 Engraving with USB connection
11:29 Engraving wood
12:39 Cutting wood
14:09 Cutting acrylic
14:48 Engraving stainless steel
15:29 Testing with rotary roller
16:48 Conclusions
#atomstack #laserengraving
Видео Atomstack P9 with new generation 10W diode laser module канала My Tech Fun
Atomstackofficial: https://bit.ly/3INLg1j
Tested engraver, Atomstack P9: https://www.atomstackofficial.com/products/atomstack-p9-m50-portable-laser-engraver
Mentioned in the video:
Rotary roller review video: https://youtu.be/eM9WyXwsJsI
R3 Rotary roller provided by Banggood: https://www.banggood.com/custlink/GD3ds2Y7zp
Air assist: https://www.banggood.com/custlink/KKvEQULuQS
Contents:
0:00 Introduction
1:31 Unboxing
3:44 Assembling
9:06 Engraving from SD card (factory code)
9:45 Engraving from SD card (own code)
11:05 Engraving with USB connection
11:29 Engraving wood
12:39 Cutting wood
14:09 Cutting acrylic
14:48 Engraving stainless steel
15:29 Testing with rotary roller
16:48 Conclusions
#atomstack #laserengraving
Видео Atomstack P9 with new generation 10W diode laser module канала My Tech Fun
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![BIQU PLA MATTLE - mechanical test](https://i.ytimg.com/vi/6O7udh1fh1w/default.jpg)
![My participation in a 3D Printed Hook Tournament organized by Polymaker](https://i.ytimg.com/vi/NHKY3zHC0NY/default.jpg)
![End of 2021, Questions and Answers, summary of 2021](https://i.ytimg.com/vi/MSOMNBqh0Hg/default.jpg)
![BambuLab A1 Mini, testing with PLA, PETG, TPU. When to use AMS?](https://i.ytimg.com/vi/tEahYFyA9vg/default.jpg)
![Gratkit 8k Rigid Resin review](https://i.ytimg.com/vi/S_pJBWRhskg/default.jpg)
![Wham Bam PEX flexible build system (on Ender2 pro, Ender3V2, Genius Pro) + Slap Mat review](https://i.ytimg.com/vi/2Yn1mXaP-ZU/default.jpg)
![Digital oven thermometer from Banggood, TS-S62. Can it survive 200°C?](https://i.ytimg.com/vi/a__nu-Mdv7U/default.jpg)
![Atomstack Maker R1 PRO review - Rotary chuck and rollers for engraving cylindrical objects](https://i.ytimg.com/vi/rq7SKz9RRFs/default.jpg)
![Review of Prusament PA11-CF and PA Nylon Spring Steel Sheet](https://i.ytimg.com/vi/kgVyx9IqGM0/default.jpg)
![Revopoint INSPIRE 3D Scanner review](https://i.ytimg.com/vi/-u_4m6NKqwc/default.jpg)
![Smoothing 3D printed object from Polysmooth™ for better cleaning - is it food safe?](https://i.ytimg.com/vi/DcWiA-sqPnI/default.jpg)
![16 PLA brand comparison test - which one is the strongest? Part 3/3](https://i.ytimg.com/vi/spCtiX4b3ds/default.jpg)
![Atomstack F3 Matrix cutting panel vs Honeycomb grid - which one is better for laser cutting?](https://i.ytimg.com/vi/VNwnUDsVjW8/default.jpg)
![BambuLab speed modes vs layer adhesion and quality (silent, standard, sport and ludicrous mode)](https://i.ytimg.com/vi/W3SCl302CP4/default.jpg)
![About Prusament Carbon Fiber PC blend layer adhesion](https://i.ytimg.com/vi/_N1MTWGqriI/default.jpg)
![The toothpick positioning method (Laser engraving with LightBurn and LaserGRBL)](https://i.ytimg.com/vi/anmn7NGvm-Y/default.jpg)
![Testing: Filaticum model (filament with gypsum) and foam (light, foaming filament)](https://i.ytimg.com/vi/9RcGLnCj0Y8/default.jpg)
![3D printing spherical six sided dice - D6 sphere](https://i.ytimg.com/vi/trrZYYRLPro/default.jpg)
![Creality filament review, part 2: mechanical tests (PLA, SILK, PETG, TPU, ABS, Carbon)](https://i.ytimg.com/vi/QBZOp1oNi34/default.jpg)
![Sandbox toy from 3D scanned face](https://i.ytimg.com/vi/EY1dEgIqUXI/default.jpg)