How to Make a Raspberry Pi Smart Mirror

In this video, we give you some detailed instructions on how to make an easy raspberry pi powered home smart mirror. A smart mirror displays applications so that you can check the weather, local news, etc. while you are getting ready in the morning. It's also modular, so you can easy move it around or hang it on the wall if you like. We've created a basic application that you can run on the smart mirror, but it's totally customizable if you want to write some of your own code. We use a Raspberry Pi 3 in this video, but you can also use an A, B+ or any other Pi.

Check our hackaday.io page for a full parts list: https://hackaday.io/project/13466-raspberry-pi-smart-mirror

Get the 3D printable part files for this project on our Patreon: https://www.patreon.com/posts/smart-mirror-37732540

LINKS:
Github project: https://github.com/HackerShackOfficial/Smart-Mirror

To Subscribe: https://www.youtube.com/channel/UCEcNXmr7DYq1XxpWHSxaN0w?sub_confirmation=1

Get our 3D printer: http://robo3d.myshopify.com?rfsn=1004615.c5abe

MATERIALS:
1 x Raspberry Pi 3
Amazon Affiliate Link - https://goo.gl/oVJcxK

1 x Low profile monitor (we used an old led display)
Amazon Affiliate Link - https://goo.gl/a4HeP5

12 ft - 1x2

12 ft - 1x3

1 x Wood glue

1 x Low profile HDMI cable
Amazon Affiliate Link - https://goo.gl/BzBTT8

1 x 18" - 24" Acrylic See-Through Mirror, 1mm
Amazon Affiliate Link - https://goo.gl/mpvZWE

You could also use a piece of one way film and a clear acrylic sheet
Amazon Affiliate Link - https://goo.gl/pTgUQy

*NOTE* - The above mirror might be too flexible and cause some distortion if it is not sandwiched properly. You could also use a thicker piece of clear acrylic and apply some one way mirror film: https://www.amazon.com/Mirror-Window-Film-Wide-Roll/dp/B004S7HPJ0/ref=pd_sim_201_4?ie=UTF8&psc=1&refRID=PJC3NH7P1TA4X4Z9PRKT
We did not experiment with this, so results may vary.

Subscribe to Hacker Shack: https://www.youtube.com/channel/UCEcNXmr7DYq1XxpWHSxaN0w?sub_confirmation=1

Follow Hacker Shack on Instagram:
https://www.instagram.com/hackershackofficial/?hl=en

MUSIC:
DJ Quads - Stop: https://soundcloud.com/aka-dj-quads/lady-vlog-music

*Disclaimer*
The methods shown in this video should be used
as a guide only.

HACKER SHACK ACCEPTS NO RESPONSIBILITY FOR
ACCIDENTS OR INCIDENTS ARISING FROM INDIVIDUALS
UNDERTAKING ANY OF THE TASKS DESCRIBED. IN
PARTICULAR, IF UNSURE YOU SHOULD ALWAYS CONTACT
A QUALIFIED TRADESMAN BEFORE PROCEEDING.

Видео How to Make a Raspberry Pi Smart Mirror канала Hacker Shack