Part 2 Sinclair ZX Spectrum Next + edition Assembling the case with the 3D printed parts

Here's the conclusion to Part 1, putting all the parts together and wiring up the LED's to the pi, it's not the best way, but it will do for now 😆

At the time of making this video, I didn't have the J13 cable to extend the 3 buttons or an SD card module, so I used an SD to SD card extension cable, and extended the buttons by making some custom parts, which work quite well.

Link to the 3d files needed:-
https://www.thingiverse.com/thing:2830759

Link to part 1
Sinclair ZX Spectrum + Next edition "Preparing the case & 3d printing the parts" on cel robox
https://youtu.be/491C0xuHFnY

parts used:-

Yoogeer SD To SD Card Flexible Extension Cable Adapter
https://www.amazon.co.uk/dp/B074H9HDD2/ref=cm_sw_r_cp_apa_PZnQAb031HDN2

Poundworld or poundland (store only) multicoloured garden lights these were in a bulb shape with clear enclosure.

Time stamps

00:38 Leveling the board and fitting the front and back panels
2:10 Fitting the button extentions
2:59 Fitting the joystick port strain relief bar
3:17 Fitting the SD card module support bracket
3:48 Fitting the pi support / raiser
4:51 Fitting the light pipe for the Next's power LED
5:24 Fitting the SD to SD card extender (solder free method)
6:23 Fitting the SD card / button panel
7:17 fitting the Ram cover
7:27 Assembling the Next edge body kit and fitting the LED's
10:14 Wiring up the Next edge body kit
12:13 Soldering the Next edge body kit to the pi
13:50 Connecting the pi to the Next board
14:42 Finally screwing it all together
17:11 The Finished Sinclair ZX Spectrum + Next Edition
18:07 Few pictures
18:37 Thank you
Timelapse royalty free music by Matthew Huffaker AKA TEKNOAXE

Chiptune does dubstep
https://youtu.be/YuH9H1lntTg

(WWWW)
https://youtu.be/Z0W16GyfcH0

8bit jungle remastered
https://youtu.be/3jHSDwc6p7s

Chiptune warriors
https://youtu.be/5beqDP-norU

Chiptune frontiers
https://youtu.be/UL8aSP-vvPo

teknoaxe Royalty Free Music https://www.youtube.com/watch?v=3jHSDwc6p7s
http://www.teknoaxe.com

Видео Part 2 Sinclair ZX Spectrum Next + edition Assembling the case with the 3D printed parts канала MAKE ME A...