Honda S2000 MAP Sensor Testing and Replacement

Today we'll be looking at the MAP Sensor (Manifold Absolute Pressure Sensor) for the Honda S2000. I'll be posting a number of sensor videos and check engine light videos for the S2000 as I wait for the top and seats to be completed. Cheers.

► Subscribe: http://youtube.com/carsntoys

►► Tools:
Scan Tool: https://amzn.to/2MAIKQj
Digital Multi Meter: https://amzn.to/2KOdFZD
Alligator Wires: https://amzn.to/2AQot3H
Jumper Wire and Probe Test Set: https://amzn.to/3bK6KON
Electronics Cleaner: https://amzn.to/3bI4vLR
Harness Connector Rebuild Kit: https://amzn.to/3qI6nsb
Safety Glasses: https://amzn.to/2BQKZ05

►►► Honda S2000 Playlist:
https://youtube.com/playlist?list=PLl6xt4Pyay3BvBtFchiIQnynJbHQGlr8Z

The Manifold Absolute Pressure Sensor, or map sensor, converts manifold absolute pressure into electrical signals to the ECM.
Honda S2000 P0107 - Map Sensor Circuit Low Voltage
Honda S2000 P0108 - Map Sensor Circuit High Voltage
Honda S2000 P1128 - Map Sensor Signal Lower Than Expected; typically below 54.1 kPa or 1.6v
Honda S2000 P1129 - Map Sensor Signal Higher Than Expected; typically above 36.9 kPa or 1.1v

Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is a member of the Amazon Influencer Program.

Publication, reproduction or distribution of this film is strictly prohibited.

Carsntoys
http://youtube.com/carsntoys

Видео Honda S2000 MAP Sensor Testing and Replacement канала CarsNToys