Live Edge Maple Slab Farmhouse Table
Build a live edge maple slab dining room farmhouse table. This project actually started a year ago when I was picking up some hardwood lumber and saw these maple slabs being milled up. As soon as I saw them I knew that we needed those maple slabs for our future kitchen table.
Fast forward a year later when the live edge slabs had been kiln dried I got them home and started to work on the farmhouse table fabrication. In the end we decided that we were going to build a metal base for the table and leave the maple slabs natural with their live edge.
In this video I go through the steps to use a router sled to flatten large wood slabs in your workshop, plan the slabs to proper dimension, joint the edges for a proper glue up and glue up the 42" wide maple live edge slab.
For finishing the slab I sanded up to 180 grit, fixed any knot holes or defects in the slabs with untinted two part epoxy and sealed it with general finishes arm r seal. Two coats on the bottom and three coats on the top. You always want to seal all surfaces of a large slab like this to aid with even wood movement.
Leg Dimensional Plans:
The fabrication of the custom metal legs will be covered in another video. Link to that below when it is available.
Wood and Resin Lamp Video: https://youtu.be/1iuSeDO4234
Portable Mortiser: https://youtu.be/L7Bu9z7G9Fc
Big thanks to RIDGID for sponsoring our channel check out their latest power tool promotions!
https://www.ridgid.com/powertools/promotions/
Some Tools I Used (affiliate Links);
Router Flattening Bit: http://amzn.to/2sjjF5k
General Finishes Arm R Seal: https://goo.gl/Hkamo8
FastCap 16oz Glue Bot: http://goo.gl/X5aNZ0
EDC Belt Carry: http://goo.gl/XZnWRx
Swanson Combination Square: http://goo.gl/EYuGAn
FastCap Tape Measure: http://goo.gl/t2lWJD
RevMarkers: https://goo.gl/UJZfnq
Mirka 6" ROS Sander: https://goo.gl/Dp85kf
Brayer Roller: http://goo.gl/bc5uIE
3M Respirator: https://goo.gl/ZexRQd
3M Respirator Filters: https://goo.gl/92Ejh0
Ear Plugs: https://goo.gl/R937J7
RIDGID Cordless Circular Saw: https://goo.gl/DVc5Tc
Видео Live Edge Maple Slab Farmhouse Table канала DIYTyler
Fast forward a year later when the live edge slabs had been kiln dried I got them home and started to work on the farmhouse table fabrication. In the end we decided that we were going to build a metal base for the table and leave the maple slabs natural with their live edge.
In this video I go through the steps to use a router sled to flatten large wood slabs in your workshop, plan the slabs to proper dimension, joint the edges for a proper glue up and glue up the 42" wide maple live edge slab.
For finishing the slab I sanded up to 180 grit, fixed any knot holes or defects in the slabs with untinted two part epoxy and sealed it with general finishes arm r seal. Two coats on the bottom and three coats on the top. You always want to seal all surfaces of a large slab like this to aid with even wood movement.
Leg Dimensional Plans:
The fabrication of the custom metal legs will be covered in another video. Link to that below when it is available.
Wood and Resin Lamp Video: https://youtu.be/1iuSeDO4234
Portable Mortiser: https://youtu.be/L7Bu9z7G9Fc
Big thanks to RIDGID for sponsoring our channel check out their latest power tool promotions!
https://www.ridgid.com/powertools/promotions/
Some Tools I Used (affiliate Links);
Router Flattening Bit: http://amzn.to/2sjjF5k
General Finishes Arm R Seal: https://goo.gl/Hkamo8
FastCap 16oz Glue Bot: http://goo.gl/X5aNZ0
EDC Belt Carry: http://goo.gl/XZnWRx
Swanson Combination Square: http://goo.gl/EYuGAn
FastCap Tape Measure: http://goo.gl/t2lWJD
RevMarkers: https://goo.gl/UJZfnq
Mirka 6" ROS Sander: https://goo.gl/Dp85kf
Brayer Roller: http://goo.gl/bc5uIE
3M Respirator: https://goo.gl/ZexRQd
3M Respirator Filters: https://goo.gl/92Ejh0
Ear Plugs: https://goo.gl/R937J7
RIDGID Cordless Circular Saw: https://goo.gl/DVc5Tc
Видео Live Edge Maple Slab Farmhouse Table канала DIYTyler
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Build A Walnut Dining Table (BYOT #23)](https://i.ytimg.com/vi/xy_tDa0rAc4/default.jpg)
![DIY Live Edge Dining Table With Metal Legs | MY FIRST TIME WELDING](https://i.ytimg.com/vi/Cy3fhan7TZc/default.jpg)
![](https://i.ytimg.com/vi/2qvnjKK0mnE/default.jpg)
![DIY Farmhouse Dining Table w/ Epoxy Inlays Using Reclaimed Barnwood](https://i.ytimg.com/vi/J9dXA33eWr0/default.jpg)
![How To Finish A LIve Edge Slab | Tips & Tricks](https://i.ytimg.com/vi/pmMTpWmoQeA/default.jpg)
![A BEAUTIFUL Walnut Live Edge Table](https://i.ytimg.com/vi/ipdSGmToZ6M/default.jpg)
![A Modern Dining Table Built for the Ages](https://i.ytimg.com/vi/MRu8MCfZfj8/default.jpg)
![Fire + Epoxy](https://i.ytimg.com/vi/6fsrLOgl69U/default.jpg)
![How to Build a FARMHOUSE TRESTLE TABLE - DIY Woodworking](https://i.ytimg.com/vi/FN73rSqJ-E0/default.jpg)
![Building an Ambrosia Maple Dining Table](https://i.ytimg.com/vi/bXV7LVjdeUo/default.jpg)
![Building a Live Edge Farm Table and Bench](https://i.ytimg.com/vi/MBNrHMMvk7o/default.jpg)
![A One of a Kind Red Cedar Bench](https://i.ytimg.com/vi/mzWP3DB1me4/default.jpg)
![DIY Ambrosia Maple Farmhouse Table for under $400](https://i.ytimg.com/vi/w92iRp_IGO4/default.jpg)
![Live Edge Slab Table | Build It | Ask This Old House](https://i.ytimg.com/vi/fImMgplZ5jw/default.jpg)
![Large dining table from an old parquet](https://i.ytimg.com/vi/IY02nJQezSw/default.jpg)
![Live Edge Slab Table Building Process by Doucette and Wolfe Furniture Makers](https://i.ytimg.com/vi/r_WvS3aJs5s/default.jpg)
![Bookmatched Live Edge Cherry Table | Woodworking](https://i.ytimg.com/vi/XpuMyVjci2U/default.jpg)
![Building Live Edge Tables! Start To Finish](https://i.ytimg.com/vi/XJSUZIcEuag/default.jpg)
![my dream work bench](https://i.ytimg.com/vi/SlIu7g_UrWU/default.jpg)
![Lighted Live Edge Cabinet](https://i.ytimg.com/vi/Kd7fOVdoSi0/default.jpg)