SP404 mk2 - USB-C Audio Routing or How to Skip The Input Effects Bus

@ddfrnds562 writes in with an issue that their USB-C audio input is playing whether they have the EXT SOURCE on the SP404 mk2 on or off. This is due to the USB In setting being set to MIX OUT. This causes the USB audio to skip the line input mixing/effects section and instead it goes straight to the main outs. Set USB In to LINE IN if you want the EXT SOURCE to toggle if you can hear the audio from USB-C.

Hope that helps!

Thanks for stopping by everybody. Keep making music, and remember, if it sounds good, it is good. Peace!

The free download for the quick reference is available at: https://www.patreon.com/posts/neartaos-sp404-4-101911920

If you'd like to order a physical copy that I'll make by hand, go to: https://www.buymeacoffee.com/neartao/e/238188

Links
mk2 Guide - https://neartao.com/neartaos-guide-to-the-sp404-mk2/
Blog - https://neartao.com
Discord - https://discord.gg/qMuSpuxC4n
Soundcloud - https://soundcloud.com/neartao
Instagram - https://www.instagram.com/near_tao/

Contact
Email - neartao@gmail.com

Support
https://www.patreon.com/neartao
https://www.buymeacoffee.com/neartao

Видео SP404 mk2 - USB-C Audio Routing or How to Skip The Input Effects Bus канала NearTao