How to solder the T-MOTOR F55A PRO II 4IN1 32BIT BLHELI32 ESC for quad drones

I use an 80w soldering iron with a thick large tip temperature controlled to 320 degrees centigrade and use ProsKit 8PK-033A-L Flux Solder.
This allows for minimal time and lowest heat temperature on the ESC to make a good solder joint without potentially damaging your ESC by over temperature and prolonged exposure to that heat.
The theory behind it is a large mass takes much more time to change temperature and won’t lose heat from applying the large iron to the ESC with heat sink that normally will take the heat away from your average 60w soldering iron with standard tip.
I hope this video helps someone out there and I know I am not the first to show soldering an ESC but I see everyone saying turn up the heat on your iron to 400 degrees and the trouble with that is that you can easily make what is known as a dry joint let alone having to apply the iron for extended periods of time on the ESC which could quite easily damage other components on the ESC when you introduce a high temperature for so long.

Видео How to solder the T-MOTOR F55A PRO II 4IN1 32BIT BLHELI32 ESC for quad drones канала Drone Pilot