Thread Cutting on the Lathe, Part Four - Setting up the Lathe and Cutting the Thread
In this final installment of my Thread Cutting on the Lathe series, we'll use the tool that we ground in earlier episodes to actually cut a thread. Topics covered are setting up the lathe, cutting the thread and measuring the thread using the three wire method.
Видео Thread Cutting on the Lathe, Part Four - Setting up the Lathe and Cutting the Thread канала Toms Techniques
Видео Thread Cutting on the Lathe, Part Four - Setting up the Lathe and Cutting the Thread канала Toms Techniques
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Another Thread Cutting Video?!Thread Cutting on the Lathe, Part One - Threading Tool GeometryLATHE SETUPSpeeds & Feeds for Steel on the Lathe! WW171Saturday Night Special 144 Part 2: Single Point Threading, Thread Dial, Even/Odd PitchThread Depth, Tool Tip Width and Length of Cut NO TRIG NEEDEDScrew Cutting on Myford ML7 Lathe - Part 1 - Setting upTaking the Mystery out of the Threading DialGet your parts to run true in a non adjustable chuck. YOU MUST WATCH THIS!Making A Lathe Chuck Back PlateCutting an Internal Thread on the Atlas Lathe, Part Two - Setting Up the ToolMaking of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]How to cut a thread on a manual lathe (Intermediate method ideal for home workshop & hobby engineer)Lathe Tool Cutter Height GaugeThread Dial Indicator imperial and metricHow to Cut a Fine Thread on a Lathe (Training Film)Threading on a manual lathe BEST TECHNIQUE EVER !!!!Turning a Diameter to Size on the LatheSHOP TIPS #182 Threading on the Clausing Lathe Using a Pre-Ground Tool tubalcainGrinding HSS Tools