Загрузка страницы

Homemade Copper Wire Stripper Machine - Fast Copper Recycling

**ENGLISH BELOW**

Hallo iedereen, dit is een korte video over onze zelfgemaakte koper strip machine. De machine is opgebouwd met een elektromotor welke via een snaar twee bussen aandrijft. De elektromotor is te bedienen via een voetpedaal. De afstand tussen deze twee bussen is af te stellen met een vleugelmoer. Er is een speciaal buisje om de kabel naar en van de bussen te sturen. De koper draad wordt door de druk tussen de bussen gespleten waardoor de koperdraad direct vrij komt en de omhulling naar beneden valt. De draad kan direct opgerold worden door de as die aan de wals vast zit.

Hello everybody, this is a short video about our homemade copper wire stripping machine. The machine is built up with a electric motor which drives a snare to spin two rollers. The electric motor can be turned on by a foot pedal. The distance between the two rollers can be adjusted by a wing nut. A special made tube is used to guide the copper wire from and to the rollers. The copper wire is split by the force between the rollers, after it is split the enclosure drops and the clean copper can be rolled into nice rolls by the tube which is on one of the rollers.

Thanks For Watching!! Like And Subscribe!!

Also Check out our Facebook page for updates on new projects!
https://www.facebook.com/Zandstras-Barn-Creations-104276311567228

Видео Homemade Copper Wire Stripper Machine - Fast Copper Recycling канала Zandstra's Barn Creations
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
23 октября 2020 г. 19:49:03
00:10:54
Яндекс.Метрика