How to remove an intake manifold water cross over. Pontiac Rebuild, Part 10

I got an Edelbrock Torker II, but need to remove the water cross over for heat reduction, and easy installation. Might as well do it now, while the engine is out. If you missed it, check out the engine tear down episode... the bearings were toast! In this episode, "How to remove a intake manifold water cross over. Pontiac Rebuild, Part 10" Again, a big thank you to @Butler Performance for coaching me through the component selection process, and porting my intake manifold. If you want it done right, get your engine components, entire rotating assembly, and/or short block from www.butlerperformance.com Follow along with the Pontiac 400 (Now a 470) engine build, by subscribing below;

Subscribe by clicking this link; youtube.com/fastmontysgarage?sub_confirmation=1

This channel is all about muscle car how to's and what to watch out for, when working on your own car. Also fresh off of installing a New TREMEC TKX from Silver Sport Transmissions, and a FiTech fuel injection system. Subscribe to watch more projects on this built, not bought, 1969 Pontiac GTO.

Tremec TKX vs. TKO review, install, and test drive;
https://youtu.be/BgmDeXS0IQs

NEW! FMG MERCHANDISE available! Here's the online store for shirts (pick a color), and face masks, (Grey, Black, or Red) https://fmgmerch.threadless.com/

Part's and/or supplies used in this video series;

Swag Offroad Portaband vice conversion;
https://www.swagoffroad.com/SWAG-Portaband-Tables-Accessories_c_35.html

Butler Performance Tomahawk Valley pan for Roller Lifters;
https://butlerperformance.com/i-24453626-butler-performance-tomahawk-stock-reproduction-valley-pan-1968-and-up-tpp-tp-041s.html?ref=search:https%3A%2F%2Fbutlerperformance.com%2Fsearch.html%3Fq%3Dtomahawk

M/E Wagner Dual Flow Adjustable PCV
http://mewagner.com/

Butler Performance Pro Oil pump, 80 lb. and 60lb. available.
https://butlerperformance.com/i-24452936-butler-performance-pro-80psi-oil-pump-bpi-m54f-pro.html?ref=search:https%3A%2F%2Fbutlerperformance.com%2Fsearch.html%3Fq%3Doil%2Bpump

Tomahawk Windage Tray
https://butlerperformance.com/i-24453778-tomahawk-pontiac-windage-tray-3-4-length-tpp-tp-042.html?ref=search:https%3A%2F%2Fbutlerperformance.com%2Fsearch.html%3Fq%3Dwindage%2Btray

Bench Top Ring Filer;
https://butlerperformance.com/i-31617959-butler-ring-filer-manual.html?ref=search:https%3A%2F%2Fbutlerperformance.com%2Fsearch.html%3Fq%3Dring%2Bfiler

Ring Compressor tool;
https://www.summitracing.com/parts/sme-90a4120

Custom Ross Racing Butler Performance, co-designed pistons;
https://butlerperformance.com/i-31643609-butler-ross-quick-ship-8cc-flat-top-forged-pistons4-250-str-4-191-bore.html?ref=search:https%3A%2F%2Fbutlerperformance.com%2Fsearch.html%3Fq%3Dpistons

Plastigage
https://www.summitracing.com/parts/cle-mpr1

B.O.P. Engineering One Piece Main Seal;
https://butlerperformance.com/i-24452904-bop-pontiac-3-00-main-dual-lip-viton-1pc-rear-main-seal-301-326-350-389-400-bop-rms18.html?ref=search:https%3A%2F%2Fbutlerperformance.com%2Fsearch.html%3Fq%3DBOP%2BEngineering

Here's the latest Walk Around of the GTO, filmed by RestoMods.com https://youtu.be/NcgjQYOGmV8

Playlists of interest;
Hydraulic Clutch and Tremec TKO/TKX install;
https://www.youtube.com/playlist?list...

FiTech Fuel Injection Install;
https://www.youtube.com/playlist?list...

Here's the original Hydraulic Roller Lifter Fail Inspection, and process:
https://youtu.be/y_iPx4CiMTg

Here's the Official Part 1, where Mike starts the preparation of Engine removal
https://youtu.be/VWt2QxXOgOE

Here's the start of the TREMEC installation, https://youtu.be/nDDeZrqF3cs

#GarageBuilt #Pontiac #DIY

Видео How to remove an intake manifold water cross over. Pontiac Rebuild, Part 10 канала Fast Monty's Garage