itoolco Power Feeder and Pulling System, Spool Loads Over 5000 lbs

Pulling 900 mcm 280 feet log with the iTOOlco wire pulling system, These high speed wire pulls avaraged about 8 minutes per pull, we used the Real Jacks and our Power Feeder to make feeding 900 mcm a breeze.
POWER FEEDER
Smarter
Jack up, transport, and power feed any wire (no lifting)
Match speeds with iTOOLco Cannon 10K Puller
Light weight and wheeled for easy maneuvering
Adjustable size fits spools from 22″ to 72″ in diameter, up to 2.5″ flange width
2,500 lb. Load capacity

Faster
Variable speed 0 to 200 feet per minute
Rolls into place for an easy set-up

Safer
No anchoring needed
Axle-less, won’t tip over
No lifting heavy wire spools

REAL JACKS

Safer
Easily lift heavy wire reels for convenient pulling
Separate sides can be used safely on uneven ground
Use with the iTOOLco axle – designed for heavier loads
Won’t tip over

Smarter
Store and transport Real Jacks right on the iTOOLco Real Tender
Can be used with 22″ to 66″ spools
Fits Wemco reels
Compact design and convenient handles
Easy to carry at 35 lbs. per side
Can be used with our axle, a 1.5″ solid or a 2″ rigid pipe

Faster
Set up in less than 1 minute
Four 20,000 lb. rated bearings make wire pulling smooth and easy
No drills or extra tools needed
Fast and easy to jack up

Видео itoolco Power Feeder and Pulling System, Spool Loads Over 5000 lbs канала iTOOLco