How to Apply Carbon Fiber Wrap for Car Interior Trim

❤Carbon Fiber Wrap ❤Get it Now: https://bit.ly/2PZyEus ❤50% Off Today. ❤Free Worldwide Shipping. ❤LIMITED Quantity Available!

We see a lot of terms flying around out there when it comes to carbon fiber.
Things like carbon fiber wrap, carbon fiber vinyl wrap, carbon fiber sheets, carbon fiber kits, etc, etc.
We thought we'd take some of these common terms and break down the difference between each so you can make more informed decisions when you're out buying the stuff.

Carbon Fiber Wrap / Carbon Fiber Vinyl / Carbon Fiber Film
There are a number of different names (and even sometimes incorrectly referred to as carbon fiber sheets), but they all refer to the same thing...imitation carbon fiber.

I prefer to call this as carbon fiber vinyl, so I'll refer to it that way for the sake of this article.
Carbon fiber vinyl is usually sold in rolls or sheets, and is usually a PVC-based vinyl that has an adhesive backing and can be stuck onto things.
Think of it like a big sticker or sort of contact paper.
It tries to mimic the real carbon fiber look (there is definitely a difference, but there is some pretty good stuff out there), but the cool thing is that the better material allows you to apply heat and then conform it around complex shapes.

How to Apply carbon fiber wrap?
In the automotive industry, carbon fiber is commonly found on high-end vehicles.
This is why applying a carbon fiber vinyl on your car will give it the look of a luxury vehicle.
Keep reading below for instructions on how to apply a carbon fiber vinyl on the interior and exterior of your car.

Step1.
Begin by cleaning the surface where the application will be applied thoroughly. Even the presence of a slight amount of dirt can affect the adhering of the vinyl sheet.
The carbon fiber sheets adhere well when the surface of the application is non-textured and smooth without even a single particle of dirt.

Step2.
Once the surface is clean, take out the pack of carbon fiber sheets, which you ordered for your car.
Make sure you carefully unroll the fiber film without messing it up. As you unroll the vinyl sheet, lay out the sheet on your lap, sitting in the upright position.
This will enable you to work easily with the sheets while applying them in your car's interiors.

Step3.
Cut out the unrolled vinyl sheet to the approximate size you desire and then begin the process of sticking the sheet to your application area.
As you apply the sheet on your application area, make sure you press the sheet properly, so that it adheres well to the area.

Step4.
Once the application process is complete, make use of your fingers or the head of a pen to mark an outline around the shape of your application area.
Once the outline of your application area is clear, take out a sharp utility blade or any other equivalent instrument and carefully trim off the extra vinyl sheet laid around the area.
As the excess of the carbon vinyl fiber sheet is removed, you're all set to admire your clean and shiny new carbon fiber look.

While putting on the carbon fiber vinyl sheet in your car interiors, make sure to press in the vinyl sheet at least 1 inch behind the area of your application.
By doing so, you can ensure that the fiber sheet adhesive adheres well with the area. If the fiber sheet is not tucked in properly, the sheet might come off over a certain span of time.
You can also make use of a heat gun for stretching and sticking the vinyl sheet over the curved areas of your car interiors.

Видео How to Apply Carbon Fiber Wrap for Car Interior Trim канала UnCommonLee