How to Make Acrylic bending machine

In this video I am showing you how to make a Acrylic/ PVC Bending Machine at home using Nichrome Wire, Aluminum Bars and Plywood Wood. This bender is powering up with 12V DC 7Ah Lead Acid Battery. For this DIY Acrylic Bending Machine most of the materials can be easily found at your home. So, Let’s Make.

Materials Required:
1. M4 Screws Hand Tightening Screws x2
2. Door Hinges x2 - https://bit.ly/2Hgdg3b
3. 12V 10A Switch - https://bit.ly/35OX6aJ
4. DC Power Connector Socket - https://bit.ly/36Pgbsr
5. Spring Coil x1 - https://bit.ly/3pSSg4a
6. Corner Bracket x2 - https://bit.ly/3ffWk9r
7. Nichrome wire 0.5mm (20cm Long) - https://bit.ly/3pEZs3E
8. Aluminum U Channel 20mm x 20mm
9. Aluminum Angle Bars 3mm Thickness
10. Screws M3/M2
11. Wires
12. Wire Crimps
13. Plywood Sheet 20mm

Subscribe LahisTech: https://bit.ly/2JHtlyc
Subscribe for more future creative project videos.
Thank you.

Видео How to Make Acrylic bending machine канала LahisTech