Lulzbot Taz 6 Repair and Upgrades
Hello! This time, I have an old Lulzbot Taz 6 3D printer that was given to my that was having issues. The tool heads looked like they were about to shake loose when the tool head did a wipe, then it would crash when trying to level. The SE tool head and the HS+ 1.2 mm tool head were both jammed up. After a lot of work, I was able to solve the crashing issue and get both tool heads to print.
Along the way, I did some upgrading - a new Wham Bam Bed System featuring the PEX surface on the spring steel bed.
Link - https://whambam3d.com/collections/flexible-build-system-for-fdm/products/300-x-300-kit-with-pre-installed-pex-build-surface-lulzbot-taz-1
Like many 3D printers, this one has a few interesting options for more upgrading, such as replacing the X and Y axis with linear rail setups. And newer tool heads. If you want me to test those, let me know - and give me a Super Like, to help fund that effort!!
** Affiliate Links that help my channel & Coupon Codes! **
Polymaker Filament - https://tinyurl.com/4f74rywz
My Amazon List of stuff I use and suggest! https://amzn.to/3D9K2fP
Patreon - https://www.patreon.com/wherenerdyiscool
Amazon - https://amzn.to/3B2QOnQ
Wham Bam Systems - https://bit.ly/3KJhHPY (Use Coupon Code WNIC2022 and save 10% !)
ZYLtech - https://tinyurl.com/mrxh3bz2 (Use Coupon Code NerdyisCool and save 5% !)
MatterHackers - https://tinyurl.com/2kmwakzs
Slice Engineering - https://tinyurl.com/298kdsbk (Use Coupon Code WHERENERDYISCOOL and save 5%)
⭐ Support me and my Channel with a Donation! ⭐ https://www.paypal.me/wherenerdyiscool
Don't forget our Web Forums! - http://www.3dprintingforum.us/
Timecodes
0:00 - Intro
1:47 - Logo
2:00 - Welcome
2:22 - Taz 6 Problems
7:49 - Replace X gantry
9:50 - Update Firmware
10:10 - Cura Test Print
13:26 - Babystep test print
14:43 - PLA test print
14:56 - Result & Enclosure
16:04 - nGen print
16:14 - 1.2 mm print head
16:36 - Miss Molly food bowl holder
16:52 - Save Money!!
17:14 - Overview & Summary
21:26 - Upgrade Options
25:18 - Taz 6 Enclosures
26:17 - Outro
Видео Lulzbot Taz 6 Repair and Upgrades канала Where Nerdy is Cool!
Along the way, I did some upgrading - a new Wham Bam Bed System featuring the PEX surface on the spring steel bed.
Link - https://whambam3d.com/collections/flexible-build-system-for-fdm/products/300-x-300-kit-with-pre-installed-pex-build-surface-lulzbot-taz-1
Like many 3D printers, this one has a few interesting options for more upgrading, such as replacing the X and Y axis with linear rail setups. And newer tool heads. If you want me to test those, let me know - and give me a Super Like, to help fund that effort!!
** Affiliate Links that help my channel & Coupon Codes! **
Polymaker Filament - https://tinyurl.com/4f74rywz
My Amazon List of stuff I use and suggest! https://amzn.to/3D9K2fP
Patreon - https://www.patreon.com/wherenerdyiscool
Amazon - https://amzn.to/3B2QOnQ
Wham Bam Systems - https://bit.ly/3KJhHPY (Use Coupon Code WNIC2022 and save 10% !)
ZYLtech - https://tinyurl.com/mrxh3bz2 (Use Coupon Code NerdyisCool and save 5% !)
MatterHackers - https://tinyurl.com/2kmwakzs
Slice Engineering - https://tinyurl.com/298kdsbk (Use Coupon Code WHERENERDYISCOOL and save 5%)
⭐ Support me and my Channel with a Donation! ⭐ https://www.paypal.me/wherenerdyiscool
Don't forget our Web Forums! - http://www.3dprintingforum.us/
Timecodes
0:00 - Intro
1:47 - Logo
2:00 - Welcome
2:22 - Taz 6 Problems
7:49 - Replace X gantry
9:50 - Update Firmware
10:10 - Cura Test Print
13:26 - Babystep test print
14:43 - PLA test print
14:56 - Result & Enclosure
16:04 - nGen print
16:14 - 1.2 mm print head
16:36 - Miss Molly food bowl holder
16:52 - Save Money!!
17:14 - Overview & Summary
21:26 - Upgrade Options
25:18 - Taz 6 Enclosures
26:17 - Outro
Видео Lulzbot Taz 6 Repair and Upgrades канала Where Nerdy is Cool!
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Eryone Carbon Fiber PLA prints! Check pinned comment for full video! #3dprinting #3dprinter #shortsE3D Revo Nozzle Pro Tip - Check Z Offset!My Iron Man Mk3 Build - Calibrating the 3D Printer & Filament!Down East Fantasy Con 2018Improving R2-D2's Charging Bay Indicator!Saturday Night Hang Out (Testing OBS Settings)Paul's Favorite Top Five YouTube ChannelsDirect Drive Upgrade for my Eryone Thinkers - Part Two!Learning to Fly Remote Controlled Airplanes & Drones!(Recorded Live Stream) CR-10S Hot End Replacement..installing Micro Swiss All Metal Hot EndMy Iron Man Mk3 Build - Introduction!(Recorded) Friday Night NERD Chat with Paul3D Printing Iron Man’s Hand #ironman #3dprinting #ironmansuit #marvel #avengersQuick and dirty time lapse video with the Ultimaker 3(Recorded Live Stream) Part Ten of the FolgerTech FT-i3 Mega Build - It's PRINTING!Answering your feedback to my CR-10 for Beginners Video! (Re-Upload)Quick Update! Sorry for being quiet!Recorded Live Stream! Working on the Tevo Tornado!(Recored Live Stream) Part Three FolgerTech FT-i3 Mega Build3D Printed dog! Using Chocolate brown PLA filament #dog #dogs #shorts #short #3dprinting