Honda P0341- Camshaft Position Sensor Incorrect Phase Detected DIY

Honda P0341. Camshaft Position Sensor Incorrect Phase Detected

.
This is a very generic and common code that can be difficult to diagnose. Multiple reasons for the code.
1, faulty sensor
2, stretched timing chain
3, VTC actuator malfunction.

NOTE:

In the video I referenced that item as actuator/solenoid..

the actual correct name is VTC oil control valve.
In this video.. #3 VTC oil control valve was the issue. The oil control piston was getting stuck.. So we did a little modification to the solenoid. Hope this video helps. Enjoy.

UPDATE. it's been about 3 months now and the CRV is running without issues after this mod.

Note. recently on a separate vehicle with a misfire. checked the spark plugs and coils which were fine. did a valve adjustment and it fixed the problem.

Update. Oct.20,2021

noted by viewer David Glass...

"I've found that a size m6 flat washer fits perfectly in there"

note by viewer OptimusOne

"M6 washers were a tad too big so I had to run back to the store to get M5s. problem solved..."

Видео Honda P0341- Camshaft Position Sensor Incorrect Phase Detected DIY канала Uncle Tinman