Hash Humanoid Robot V3 | Making Walk-Through | Hash Robotics

Hello Humanoids...
Sorry for the delay...
Here is the video of making and walk-through of Hash Humanoid Robot Version 3.
In this video, I have explained how I made the robot and what enhancements I have done.

Components Used...
3D printed parts
Arduino mega pro mini
MG995 Servo 18
SG90 Servo 1
LED 2
LM2596 DC-DC Buck Convertor 2
12V Battery
On/Off Switch
M3 10mm Screws
Wires and Battery Adaptors

Get Source Code and Circuit Diagram here: https://github.com/hashrobotics-hr/hash_humanoid_robot_v3.git
Get 3D files here: https://hashrobotics.gumroad.com/l/hashv3humanoid

Also, watch my other videos...
Hash Humanoid Robot V3 Intro: https://youtu.be/x0jZBJS32h0
3D printed 19DOF humanoid robot using Arduino: https://youtu.be/EOB0rQvOzFI
Obstacle avoiding robot using Raspberry Pi Pico with Micropython: https://youtu.be/w0E2aDWQj-M
Mini humanoid robot using ESP32 Hash Junior: https://youtu.be/_E-jsi4zJ7U
Stay connected...
Facebook: https://www.facebook.com/hashrobotics/
Instagram: https://www.instagram.com/hash_robotics/
Twitter: https://twitter.com/hash_robotics

Видео Hash Humanoid Robot V3 | Making Walk-Through | Hash Robotics канала Hash Robotics