Single Flute end mill at 15,000 FPS: DATRON Cross Cutter

CONSIDER SUBSCRIBING ►http://bit.ly/Subscribe_Breaking_Taps
📢Twitter: https://twitter.com/BreakingTaps
💻Discord: https://discord.gg/R45uCXcEv4

DATRON Cross Cutter and Single Flute end mill filmed at 15,000 FPS.

Today we're cutting some 6061 with single flute tooling provided by DATRON, recorded at high speed. And it looks glorious! Apologies about the audio, I had some microphone difficulties that weren't discovered until later :(

Tools used:
- 6mm single flute carbide: 0068460E (https://www.datron.com/product/single-flute-end-mills/)
- 6mm Cross Cutter rougher: 00688006E (https://www.datron.com/product/cross-cutter/)

Go check out DATRON's channel @DatronCNC: https://www.youtube.com/user/DatronCNC

0:00 Intro
1:20 Single flute end mills
2:03 DATRON end mills
2:49 Cross Cutter
4:06 Slow Mo: Single flute, climb
4:53 Slow Mo: Single flute, conventional
5:30 Detour: spindle rotation speed analysis
7:25 Slow Mo: Cross Cutter, climb
9:36 Slow Mo: Cross Cutter, conventional
10:46 Bloopers

Видео Single Flute end mill at 15,000 FPS: DATRON Cross Cutter канала Breaking Taps