How to Replace Rear Output Drive Shaft Seal in Transfer Case
GM Seal: https://amzn.to/2Vhgo2u
How to Replace Rear Output Drive Shaft Seal in Transfer Case and Transmission
In this video I am replacing leaking drive shaft seal. This process can be used for replacing rear output shaft seal in transfer case and transmission.
Steps to replace drive shaft seal:
Mark the rear universal joint to the drive shaft flange
Remove 4 retaining bolts and clamps
Remove the propeller shaft from the pinion drive flange
Remove the propeller shaft from the transfer case
Remove the seal and install new drive shaft seal
Align the propeller shaft with the reference marks on the pinion flange and reinstall shaft
Finish tightening to your vehicle torque spec for my Hummer H3: 25 N.m (18 lb ft)
After finishing drive shaft install, check Transfer Case fluid level and add if required.
To check Transfer case fluid level:
1. Make sure the vehicle is leveled
2. Remove Transfer case Fill Plug
3. Check Transfer case fluid level
Using a flashlight, check for oil at the fill plug hole. When full, the oil should be just below the hole, or dripping a bit from the hole
Add fluid recommended for your vehicle if required.
When fluid start dripping - reinstall Fill Plug
PLEASE NOTE: 2006 HUMMER H3 and certain models of 2007, the procedure to fill the transfer case is different. You need to fill to fill plug, reinstall fill plug and ADD 250 ML trough speed sensor hole (located in the upper part of the transfer case) In these transfer cases, there is a metal sticker that describe this. The fluid for these transfer case is not Dexron VI. The fluid is GM Part Number: 88861800. And total fill amount is 1.5 liters
#driveshaft #transfercase #seal #4x4 #hummerh3 #h3
Disclaimer: This video is for entertainment purpose only! NewRoad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician to avoid injury, death, car and property damages.
Disclosure: As an Amazon Associate I earn from qualifying purchases
NewRoad Adventures Copyright
Видео How to Replace Rear Output Drive Shaft Seal in Transfer Case канала NewRoad Adventures
How to Replace Rear Output Drive Shaft Seal in Transfer Case and Transmission
In this video I am replacing leaking drive shaft seal. This process can be used for replacing rear output shaft seal in transfer case and transmission.
Steps to replace drive shaft seal:
Mark the rear universal joint to the drive shaft flange
Remove 4 retaining bolts and clamps
Remove the propeller shaft from the pinion drive flange
Remove the propeller shaft from the transfer case
Remove the seal and install new drive shaft seal
Align the propeller shaft with the reference marks on the pinion flange and reinstall shaft
Finish tightening to your vehicle torque spec for my Hummer H3: 25 N.m (18 lb ft)
After finishing drive shaft install, check Transfer Case fluid level and add if required.
To check Transfer case fluid level:
1. Make sure the vehicle is leveled
2. Remove Transfer case Fill Plug
3. Check Transfer case fluid level
Using a flashlight, check for oil at the fill plug hole. When full, the oil should be just below the hole, or dripping a bit from the hole
Add fluid recommended for your vehicle if required.
When fluid start dripping - reinstall Fill Plug
PLEASE NOTE: 2006 HUMMER H3 and certain models of 2007, the procedure to fill the transfer case is different. You need to fill to fill plug, reinstall fill plug and ADD 250 ML trough speed sensor hole (located in the upper part of the transfer case) In these transfer cases, there is a metal sticker that describe this. The fluid for these transfer case is not Dexron VI. The fluid is GM Part Number: 88861800. And total fill amount is 1.5 liters
#driveshaft #transfercase #seal #4x4 #hummerh3 #h3
Disclaimer: This video is for entertainment purpose only! NewRoad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician to avoid injury, death, car and property damages.
Disclosure: As an Amazon Associate I earn from qualifying purchases
NewRoad Adventures Copyright
Видео How to Replace Rear Output Drive Shaft Seal in Transfer Case канала NewRoad Adventures
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![HOW TO REPLACE A LEAKING REAR TRANSFER CASE OUTPUT SEAL CHEVY TAHOE](https://i.ytimg.com/vi/Kz9kO3kwIC8/default.jpg)
![How To Fix Transfer Case Output Shaft Leak Chevy Suburban Silverado Tahoe Yukon](https://i.ytimg.com/vi/Xrkn_FAzHZc/default.jpg)
![How I build bed in 4x4 SUV for Camping and Overlanding Adventures](https://i.ytimg.com/vi/XxMFP-gPA3w/default.jpg)
![What cause rearend noise when transmission gear shift . Part 1/13](https://i.ytimg.com/vi/NTJkHupyIzc/default.jpg)
![How to Replace Toyota Pinion Oil Seal in Rear Differential/3rd Member](https://i.ytimg.com/vi/0xGH8J9YJYs/default.jpg)
![How to Install Transmission Cooler Bypass Radiator - GMC Canyon, Chevrolet Colorado, Hummer H3](https://i.ytimg.com/vi/dcQjqibB3mc/default.jpg)
![Transfer Case Output Shaft Seal Replacement](https://i.ytimg.com/vi/8YuY6rv1hkE/default.jpg)
![Hummer H3, Transfer Case Fluid Change (Dexron VI)](https://i.ytimg.com/vi/72GcC2z9rEE/default.jpg)
![ATV 4 Wheeler Differential Flush - Limited Slip Additives](https://i.ytimg.com/vi/nQDMAYfNWp4/default.jpg)
![Transmission Fluid Low / No Leaks / Replace Transfer Case Input Seal - Ford F150](https://i.ytimg.com/vi/bebr1BmpbXg/default.jpg)
![Fabricating Tracks - Tracked Amphibious Vehicle Build Ep. 19](https://i.ytimg.com/vi/lECijRk0qqU/default.jpg)
![Drive shaft repairing and strengthening welding](https://i.ytimg.com/vi/ztylBJnufSs/default.jpg)
![How to replace a transfer case output shaft seal Toyota Rav4 AWD](https://i.ytimg.com/vi/tnj27Wup950/default.jpg)
![2008 Rav4: Transfer Case Fluid Change](https://i.ytimg.com/vi/0sTsYpfyEWA/default.jpg)
![Output Shaft Seal FIX (Front of Drive Shaft) 2004 Dodge Ram 2500](https://i.ytimg.com/vi/i1ygNIdTkQ0/default.jpg)
![How to Install a Water Pump: 2006 - 2010 Hummer H3 3.7L L5 WP-9234 AW5097](https://i.ytimg.com/vi/YXrFGiRlf7c/default.jpg)
![how to replace the output shaft seal ford ranger 01](https://i.ytimg.com/vi/DkWOme8yY1w/default.jpg)
![How to replace rear transmission seal chevy Silverado 4l80E](https://i.ytimg.com/vi/reHbdDmQib0/default.jpg)
![How to replace Axle Seal and CV Axle on Hummer H3, GMC Canyon, Chevrolet Colorado](https://i.ytimg.com/vi/lShkJ_whlGo/default.jpg)
![Toyota Pinion Seal Replacement](https://i.ytimg.com/vi/inzulc9rD6w/default.jpg)