BRETON BOOTH overview in EMO 2017 - Matrix E2, Ultrix E3, Industry 4.0
Here's an overview of Breton booth at the 2017 edition of Emo Hannover.
MATRIX 1000
Breton has designed a machine driven by Mould & Die market needs, removing previous model limits and applying the entire lesson learned from the huge amount of machines installed.
The result is a last generation portal machine proposed as global solution for Mould&Die customers and as a market reference point. The combination of easy interchangeable head and wide range of available electrospindles allow solving molds accessibility issues. All the heads are direct drive with high dynamics and powerful brakes to manage difficult machining.
The complete redesign has doubled machine stiffness increasing also vibration dumping without any effect on the dynamic and precision performances. For the RAM it’s also available an hydrostatic version that increases even more the vibration dumping results. Matrix can now move from high material removal rate to extreme finishing quality without any problem.
Best in class precision and repeatability together with optimal ratio between working area and external footprint, make the new Matrix 1000 a perfect solution also for Aerospace.
ULTRIX 1400
The vertical spindle allow an easier piece setup, the trunnion table offers a better accessibility and can be used to remove chips rotating A axis. The machine has a great dynamic in order to guarantee high productivity also on 5 axis machining of aluminum components.
The design is thermo-symmetric in order to reduce and better control structural deformations due to temperature effects. Of course all the heating sources are cooled to avoid heat transfer to other components.
The machine basement is produced using Metalquartz, a patent technology, resulting in a structure better than a cast iron one from both rigidity and vibration dumping point of view.
All the machine components involved in operators preventive maintenance are grouped in an easily accessible area. The tool change has the loading area in front of the machine, different types of tool holders (Capto, Hsk, …) can be automatically managed on milling spindle, turning bar or angular head.
One or two angular heads can be stored in the machine back area, loading and downloading is automatic and the assembly with the RAM is based on a hydraulic clamping allowing to transfer the full torque and power of the spindle. The tool change is automatic too.
The CN can be adjusted in height and inclination in order to increase operators comfort. Piece accessibility has been improved allowing the operator to stay at only .6 in from the turning table. Machine roof can be completely opened to easily load fixtures and pieces.
The Ultrix 1400, and the milling version Xceeder 1400, are the biggest existing of this type. They give to the user a piece accessibility never seen in the Aerospace market, even in the internal or the external part of the component allowing a productivity with no compromises.
BRETON NAVIMAN & BRETON SENTINEL
If correctly managed it’s a great opportunity for the industry.
Working will be easier and safer for the operators, the machines will cooperate between each other, giving more time to concentrate on innovation and competitiveness.
We can offer a complete software suite to let you and your company jump into the new era!
Breton Naviman and Breton Sentinel have been developed not only to interconnect our machines but all your shopfloor!
Another good news is that you can start with a very basic configuration to monitor the machines and than integrate the system step by step with additional apps.
🔎 http://www.breton.it/machinetool/en
Facebook 👉 https://www.facebook.com/bretonspa/
Linkedin 👉 https://goo.gl/JbJfT2
Видео BRETON BOOTH overview in EMO 2017 - Matrix E2, Ultrix E3, Industry 4.0 канала Machine tools
MATRIX 1000
Breton has designed a machine driven by Mould & Die market needs, removing previous model limits and applying the entire lesson learned from the huge amount of machines installed.
The result is a last generation portal machine proposed as global solution for Mould&Die customers and as a market reference point. The combination of easy interchangeable head and wide range of available electrospindles allow solving molds accessibility issues. All the heads are direct drive with high dynamics and powerful brakes to manage difficult machining.
The complete redesign has doubled machine stiffness increasing also vibration dumping without any effect on the dynamic and precision performances. For the RAM it’s also available an hydrostatic version that increases even more the vibration dumping results. Matrix can now move from high material removal rate to extreme finishing quality without any problem.
Best in class precision and repeatability together with optimal ratio between working area and external footprint, make the new Matrix 1000 a perfect solution also for Aerospace.
ULTRIX 1400
The vertical spindle allow an easier piece setup, the trunnion table offers a better accessibility and can be used to remove chips rotating A axis. The machine has a great dynamic in order to guarantee high productivity also on 5 axis machining of aluminum components.
The design is thermo-symmetric in order to reduce and better control structural deformations due to temperature effects. Of course all the heating sources are cooled to avoid heat transfer to other components.
The machine basement is produced using Metalquartz, a patent technology, resulting in a structure better than a cast iron one from both rigidity and vibration dumping point of view.
All the machine components involved in operators preventive maintenance are grouped in an easily accessible area. The tool change has the loading area in front of the machine, different types of tool holders (Capto, Hsk, …) can be automatically managed on milling spindle, turning bar or angular head.
One or two angular heads can be stored in the machine back area, loading and downloading is automatic and the assembly with the RAM is based on a hydraulic clamping allowing to transfer the full torque and power of the spindle. The tool change is automatic too.
The CN can be adjusted in height and inclination in order to increase operators comfort. Piece accessibility has been improved allowing the operator to stay at only .6 in from the turning table. Machine roof can be completely opened to easily load fixtures and pieces.
The Ultrix 1400, and the milling version Xceeder 1400, are the biggest existing of this type. They give to the user a piece accessibility never seen in the Aerospace market, even in the internal or the external part of the component allowing a productivity with no compromises.
BRETON NAVIMAN & BRETON SENTINEL
If correctly managed it’s a great opportunity for the industry.
Working will be easier and safer for the operators, the machines will cooperate between each other, giving more time to concentrate on innovation and competitiveness.
We can offer a complete software suite to let you and your company jump into the new era!
Breton Naviman and Breton Sentinel have been developed not only to interconnect our machines but all your shopfloor!
Another good news is that you can start with a very basic configuration to monitor the machines and than integrate the system step by step with additional apps.
🔎 http://www.breton.it/machinetool/en
Facebook 👉 https://www.facebook.com/bretonspa/
Linkedin 👉 https://goo.gl/JbJfT2
Видео BRETON BOOTH overview in EMO 2017 - Matrix E2, Ultrix E3, Industry 4.0 канала Machine tools
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
