Project Time: DIY Smoke Machine Build - Find Those Vacuum Leaks!

In this video, I show how I built my DIY smoke machine for locating vacuum leaks. I am going to use this machine to try to locate a leak on one of my project cars.

Updated list of items. I had some of these already in the shop, so here are some examples of what you can use to build this project.
Paint Can (if you don't have one laying around): https://goo.gl/Vz9Yxn
28 AWG Nichrome Wire: http://a.co/fNx7Lnj
Lamp Wick: http://a.co/4oYVbPs
Binding Post: http://a.co/04XfwfV
Alligator Clips: http://a.co/jc6SVb6
Grommet Set: https://goo.gl/dJkXZz
Vacuum Line: http://a.co/d/hTGCYfM
Barbed fitting: http://a.co/d/iR7MJ60
Air Line Fitting: https://goo.gl/BmJ3HP
The total cost if you were to buy everything needed at the time of filming is around $33. This is a lot cheaper than commercially available machines on the market.
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. RUSTY WRENCHES, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL RUSTY WRENCHES CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Rusty Wrenches makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Видео Project Time: DIY Smoke Machine Build - Find Those Vacuum Leaks! канала Rusty Wrenches