Загрузка страницы

Building the TotalBoat Sport Dory: Episode 35 - Varnish

It's time to Varnish our TotalBoat Sport Dory and we're gonna do things a little differently this time. We're gonna varnish our Dory upside down!

If we had put caps on the sheer we would be able to varnish the guards, right over the caps and then down inside the inwhales. But with the sheer open and the frames exposed, we run a big risk of having varnish run down between the two into the interior of the boat.
So we're going to hang our Sport Dory upside down from the overhead and let gravity work for us.

We need to sand the guards, top of the sheer plank and the inwhales with 220 sandpaper to get them ready for varnishing. We want to focus on the edges and round those out a little bit so they will better hold varnish and not chop off later on.

For our first coat we're going to use TotalBoat Wood Sealer. It's a varnish primer that will help fill the grain, seal the wood fibers and level surface to get us ready for our Varnish.

We will let the Wood Sealer dry overnight and then sand again with 220 paper before applying our TotalBoat Gleam 2.0 Marine Spar Varnish. While brushing on this second coat we need to keep an eye on how much varnish we are putting on our brush and applying to the boat so that we don't get any runs. We want to make sure to tip the varnish as we go to help us achieve a smooth level finish.

Become a member of the Tips Team!! Support Lou and the Tips from a Shipwright youtube channel by joining our Patreon page:
https://www.patreon.com/tipsfromashipwright

Subscribe to Tips from a Shipwright on Youtube for more episodes of the Sport Dory series and sign up for our email list at
http://www.tipsfromashipwright.com/email

Help support the channel with a Tips from a Shipwright Hat and T-shirt!!!
http://www.tipsfromashipwright.com/store
http://www.facebook.com/tipsfromashipwright
http://www.twitter.com/louissauzedde

Subscribe to TotalBoat for product info and other how-to videos: http://www.totalboat.com
https://www.jamestowndistributors.com

Products available at http://www.totalboat.com

TotalBoat Wood Sealer:
http://www.totalboat.com/product/wood-sealer-varnish-primer/

TotalBoat Gleam 2.0 Marine Spar Varnish:
http://www.totalboat.com/product/gleam/

Видео Building the TotalBoat Sport Dory: Episode 35 - Varnish канала Tips from a Shipwright
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
21 сентября 2018 г. 12:29:22
00:21:55
Другие видео канала
J/Fest West Regatta at St Francis Yacht Club - San FranciscoJ/Fest West Regatta at St Francis Yacht Club - San FranciscoDynel application part IIDynel application part IIKestrel at the Opera House Cup 2014Kestrel at the Opera House Cup 2014Building ORCA - Episode 9: Back to the sawmill for the stern post, horn timber and framing stockBuilding ORCA - Episode 9: Back to the sawmill for the stern post, horn timber and framing stockBuilding the V-Bottom Skiff: Episode 29 - Laminating our knees with epoxyBuilding the V-Bottom Skiff: Episode 29 - Laminating our knees with epoxyBuilding ORCA - Episode 6: Connecting the keel to the forefootBuilding ORCA - Episode 6: Connecting the keel to the forefootBuilding ORCA - Episode 8: Connecting the forefoot to the stem - deep drillingBuilding ORCA - Episode 8: Connecting the forefoot to the stem - deep drillingBuilding the V-Bottom Skiff: Episode 36: Final steps of constructionBuilding the V-Bottom Skiff: Episode 36: Final steps of constructionBuilding the V-Bottom Skiff: Episode 33 - Plane crazy How to plane on a curveBuilding the V-Bottom Skiff: Episode 33 - Plane crazy How to plane on a curveHow to tighten rivets on the wooden boat REMORA (1928) Herreshoff 12 1/2  (Part 3)How to tighten rivets on the wooden boat REMORA (1928) Herreshoff 12 1/2 (Part 3)Building the V-Bottom Skiff - Episode 39: Plunge cutting the transom for our outboard motor installBuilding the V-Bottom Skiff - Episode 39: Plunge cutting the transom for our outboard motor installBuilding the V-Bottom Skiff - Episode 40:  Painting up the topside, bottom and out the open door!Building the V-Bottom Skiff - Episode 40: Painting up the topside, bottom and out the open door!Building the 23' V-Bottom Skiff - Episode 7:  Laying down the soleBuilding the 23' V-Bottom Skiff - Episode 7: Laying down the soleBuilding the V-Bottom Skiff - Episode 41: Sea trialsBuilding the V-Bottom Skiff - Episode 41: Sea trialsBuilding ORCA - Episode 4: Drawing ORCA and the search for all items on deck!Building ORCA - Episode 4: Drawing ORCA and the search for all items on deck!Building ORCA - Episode 7: Drilling the center line for boltingBuilding ORCA - Episode 7: Drilling the center line for boltingBuilding ORCA - Episode 10: Installing the Stern PostBuilding ORCA - Episode 10: Installing the Stern PostBuilding the V-Bottom Skiff: Episode 35 - Scarfing the caps with a ship-saw and rabbit planeBuilding the V-Bottom Skiff: Episode 35 - Scarfing the caps with a ship-saw and rabbit planeBuilding the V-Bottom Skiff - Episode 37: Plugging awayBuilding the V-Bottom Skiff - Episode 37: Plugging awayBuilding the V-Bottom Skiff - Episode 38: How to varnish your wooden boatBuilding the V-Bottom Skiff - Episode 38: How to varnish your wooden boatBuilding the V-Bottom Skiff - Episode 31:  Finishing the knees and getting out the inwhalesBuilding the V-Bottom Skiff - Episode 31: Finishing the knees and getting out the inwhales
Яндекс.Метрика