How To Swap Pickups In A Semi-Hollow Guitar | Guitar Tech Tips | Ep. 65 | Thomann

You need a lot of patience and a few useful tools if you want to swap the pickups in an ES-style semi-hollowbody guitar. Kris shows us a few nice tips to make a pickup swap way easier by soldering through the F hole.
Enjoy Guitar Tech Tips!

How to solder guitar electronics: https://youtu.be/4-XZJwAD9Z8

Gear used: http://tho.mn/fxw8p
We use Triad-Orbit stands for our cameras, lights and mics: http://tho.mn/triad
Recorded and mixed with Universal Audio: http://tho.mn/uadx1
Monitors optimised through Sonarworks: http://tho.mn/sonar

Interesting bits and pieces:
0:00 introduction
0:47 preparing the guitar
1:06 How to remove the knobs?
1:39 Super important: the pots
3:01 The jack
3:19 I'll solder inside the body, through the F hole
3:43 Remove the old pickups
4:28 Install the new pickups
5:15 Tools you'll need for the job
5:26 Let's solder
6:12 pull out the pots and tighten them
6:45 Time for a test ride
7:44 Outtakes

Webshop: https://www.thomann.de
Facebook: https://www.facebook.com/thomanninternational
Twitter: @thomann https://twitter.com/thomann
Instagram: @thomann.music https://instagram.com/thomann.music
Pinterest: https://www.pinterest.com/thomannde/

Visit our blogs:
GER: https://www.thomann.de/blog/de/
ENG: https://www.thomann.de/blog/en/
FRA: https://www.thomann.de/blog/fr/
ESP: https://www.thomann.de/blog/es/
ITA: https://www.thomann.de/blog/it/
NED: https://www.thomann.de/blog/nl/
FIN: https://www.thomann.de/blog/fi/

Видео How To Swap Pickups In A Semi-Hollow Guitar | Guitar Tech Tips | Ep. 65 | Thomann канала Thomann's Guitars & Basses