AIO-cooled 폼디 FormD T1 Build with EVGA 3080 FTW3, Corsair H100i (A to Z Build Guide) 폼디 3슬롯 짭수 빌드 영상

AIO-cooled FormD T1 Build with EVGA 3080 FTW3, Corsair H100i (A to Z Build Guide) 폼디 T1 3슬롯 짭수 빌드 영상입니다.

Hi everyone, after 2 slot air-cooled build guide(https://youtu.be/e6om5bz1dEE), I'm back with 3 slot AIO-cooled build guide!

Yes. It is a 9.48L case you can put massive 3080 FTW3 and 240mm AIO inside. just unbelievable.

The hardest and most important part is to put radiator on the top. you need to start from installing MB as low as possible so that secure more space between radiator.
If you have radiator over 26mm, I recommend you to put fans on the top of radiator, or the fan between radiator and MB will grind your PCB.(Actually, It doesn't spin well because of interference
Just put your fan on the radiator without any rubber foot and use socket set screw(UNC 6-32 3/4 or 19mm) and tape.

Also cable management and routing for hose is important. you need to secure space for your hose to travel. Hide your AC power cable inside the gap between front panel and PSU.

There is no space above and behind PCI-E power inlet so that you need to route PCI-E power cable to the side space behind GPU and front panel. Maybe you need customized silver cables.

Finally, GPU undervolting is highly recommended.
With stock voltage and clock setting, 3080 FTW3 is an electric heater. In RDR2 4k bench, It was 376W/77`C in maximum. in 1080p situation, It was 354W/75`C

After I undervolted it with 1890MHz/ 825mV(850mV or 875mV is recommended for stability), in 4k scenario, It was 280W/68`C. And in 1080p, It was 232W/64`C.

Frame difference was minimal, especially in 4k bench, It was less than one or two frame. But I could save one hundred watt and got 10 degree better thermal result.

I hope you guys enjoy this build and also build guide and please wait for 3 slot custom loop build!

Detailed Spec

Case - FormD T1 (https://formdworks.com/products/t1) , re-anodized
CPU - AMD RYZEN 5600X
MB - ASRock B550 Phantom Gaming-itx/ax
RAM - G.SKILL Flare X 3200CL14
Cooling Solution - Corsair H100i Platinum SE + Noctua NF-A12x15*2
Storage - ADATA SX8200 PRO 1TB
VGA - EVGA GeForce RTX 3080 FTW3
PSU - Corsair SF750 Platinum
Etc. - Bunch of custom cables
(https://shop313600283.taobao.com/?spm=a230r.1.0.0.20ce477bsSlCxR)

Electric Screwdriver - Xiaomi Mijia Electrical Precision Screwdriver Kit 2
https://www.aliexpress.com/item/1005001290671835.html (No referral) / My previous one(Wowstick passed away from 1 meter diving)

Contact
Youtube - https://www.youtube.com/c/CasperSFF
Discord - Casper#3867
Reddit - https://www.reddit.com/user/yummy_yoon

Видео AIO-cooled 폼디 FormD T1 Build with EVGA 3080 FTW3, Corsair H100i (A to Z Build Guide) 폼디 3슬롯 짭수 빌드 영상 канала CasperSFF