Replacing Bearings In A Bottom Bracket
I could feel some play in the bottom bracket that I could feel when I moved the cranks. I probably could have just adjusted the adjustable cup, But I wasn't sure what the issue was. It could have been worn bearings, or some sort of damage. But I wouldn't know that until I opened it up. So if I was going to open it up, I might as well clean and lube everything and replace the bearings. So that is what I did.
Some tools used in this video:
Park Tool Compact Crank Puller:
http://www.amazon.com/exec/obidos/ASIN/B0028YUZSS/ref=nosim/youtube25-20
Park Tool HCW-5 Lock Ring Spanner:
http://www.amazon.com/exec/obidos/ASIN/B000C17KRI/ref=nosim/youtube25-20
Park Tool SPA-2 Cluster Cone Pin Spanner (Red)
http://www.amazon.com/exec/obidos/ASIN/B001B6LNRQ/ref=nosim/youtube25-20
Park Tool HCW-4 Box End and Pin Spanner Crank Wrench (36mm)
http://www.amazon.com/exec/obidos/ASIN/B000AOA2G8/ref=nosim/youtube25-20
Bicycle Research Crank Arm Thread Chaser, TC-8:
http://www.amazon.com/exec/obidos/ASIN/B001PTALQ8/ref=nosim/youtube25-20
Dualco Grease Gun with Short Nozzle:
http://www.amazon.com/exec/obidos/ASIN/B0025UGOVW/ref=nosim/youtube25-20
**If the video was useful or interesting please give it a "thumbs up" and consider subscribing.
▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
https://www.facebook.com/RJTheBikeGuy
▶TOOLS
http://www.rjthebikeguy.com/tools
▶SHIRTS
http://bit.ly/RJBikeGuyShirts
▶WEBPAGE
http://www.RJTheBikeGuy.com
Видео Replacing Bearings In A Bottom Bracket канала RJ The Bike Guy
Some tools used in this video:
Park Tool Compact Crank Puller:
http://www.amazon.com/exec/obidos/ASIN/B0028YUZSS/ref=nosim/youtube25-20
Park Tool HCW-5 Lock Ring Spanner:
http://www.amazon.com/exec/obidos/ASIN/B000C17KRI/ref=nosim/youtube25-20
Park Tool SPA-2 Cluster Cone Pin Spanner (Red)
http://www.amazon.com/exec/obidos/ASIN/B001B6LNRQ/ref=nosim/youtube25-20
Park Tool HCW-4 Box End and Pin Spanner Crank Wrench (36mm)
http://www.amazon.com/exec/obidos/ASIN/B000AOA2G8/ref=nosim/youtube25-20
Bicycle Research Crank Arm Thread Chaser, TC-8:
http://www.amazon.com/exec/obidos/ASIN/B001PTALQ8/ref=nosim/youtube25-20
Dualco Grease Gun with Short Nozzle:
http://www.amazon.com/exec/obidos/ASIN/B0025UGOVW/ref=nosim/youtube25-20
**If the video was useful or interesting please give it a "thumbs up" and consider subscribing.
▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
https://www.facebook.com/RJTheBikeGuy
▶TOOLS
http://www.rjthebikeguy.com/tools
▶SHIRTS
http://bit.ly/RJBikeGuyShirts
▶WEBPAGE
http://www.RJTheBikeGuy.com
Видео Replacing Bearings In A Bottom Bracket канала RJ The Bike Guy
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
What Type of Bottom Bracket do I Have?Remove Cranks Without A Crank PullerReplace Caged Bearings With Loose Bearings In Bottom Bracket OverhaulHow to Take Apart and Service the Bottom Bracket on a BicycleHow To Fix A Creaking Bottom Bracket Or CranksHow to Remove and Install Bottom Brackets - Cup & ConeHow to Upgrade Bottom Bracket to Sealed Bearing (6903 2RS)Sealed Cartridge Bottom Bracket Disassembly/AssemblyOld-School bottom bracket service, part oneHow To Upgrade Vintage Bike With Sealed Cartridge Bottom BracketOverhaul A Bike’s Cup And Cone Bottom BracketHow To Replace Bike Wheel Hub BearingsHow To Remove/Install Sealed Cartridge Bottom BracketBicycle Freewheel Disassembly/AssemblyHow To Fix Bottom Bracket NoisesHow To Overhaul A Bike Bottom Bracket - Remove/Clean/Install New BearingsHOW TO REMOVE a CRANK ARM and TIGHTEN a CARTRIDGE BOTTOM BRACKET on a DIAMONDBACK HYBRID BIKEHow to Remove and Install Bottom Brackets - Threaded Shell (BSA, T47, Cartridge, etc.)Square Taper Bottom Bracket To GXP Bottom Bracket ReplacementHow To Fix Loose Wobbly Wheel Hub