Using a Hole Cutter Die & Grommet Die with the Pres-N-Snap Tool
In this video we will use the Pres-N-Snap tool to punch a hole in fabric assemblies then we will install a spur and plain washer grommet.
Before a spur or plain washer grommet can be installed in fabric a hole needs to be made to accept the male portion of the grommet. We will use the Pres-N-Snap tool to punch the hole and then set the grommets.
For more information about these tools visit: http://www.sailrite.com/Pres-N-Snap-Fastener-Tool
Видео Using a Hole Cutter Die & Grommet Die with the Pres-N-Snap Tool канала Sailrite
Before a spur or plain washer grommet can be installed in fabric a hole needs to be made to accept the male portion of the grommet. We will use the Pres-N-Snap tool to punch the hole and then set the grommets.
For more information about these tools visit: http://www.sailrite.com/Pres-N-Snap-Fastener-Tool
Видео Using a Hole Cutter Die & Grommet Die with the Pres-N-Snap Tool канала Sailrite
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Install a Grommet (eyelet) 🛠 How to Use a Grommet Maker - BB Renos e010 GrommitWhat are Press Dies & Adapters? (Tutorial)Pres-N-Snap Installation Tool DemoUnderstanding different grommet structures and which is best for youInstalling Twist Lock Fastener with Buttons - Using Sailrite's Most Popular ToolsΠως να περασετε ανοξειδωτα μπουντουζια με την μπουντουζιερα Strong-1 (Howto)Using the Speedy Stitcher to Sew Webbing & CanvasSet Rivets & Grommets in Leather w/ & without ToolsAsk Sara: How to Use a Rivet PressCanvas & Sail Grommets - Spur vs. WasherTop 5 Best Grommet Tools in 2020 ReviewsEagle II Webbing TestΠως περνάμε τρούκ σε μουσαμά με την πρέσα χειρός HAND-1Sewing Seam Construction - The Three Popular Seams for CanvasDIY RivNut with a DRILL? | How To Nutsert Rivet Nut DIY [without tool]How to Make a Monkey's Fist — No JigHow to Make a Slide-On Wire Hung Canopy (Pergola Canopy)Simple Rivet Nut Tool | DIY TOOLΠως να χρησιμοποιήσετε την μπουντουζιέρα STEP-2Setting Large Grommets and Eyelets with the Osborne Die Tool.