How to unboxing LG front load Fully Automatic Washing machine step by step

*How to unbox an LG front load fully automatic washing machine - step by step | UK*

Unboxing right avoids damage and saves you a call to LG support. Do this before you plug anything in.

1. *Check delivery and placement*
- Make sure you’ve got 60cm width, 60cm depth, and 85cm height minimum. Leave 5cm at the back for hoses.
- Check the box for dents or water damage before signing for it. If it’s damaged, note it on the delivery note.
- Get help - the machine is 60-70kg. Don’t lift it alone.

2. *Cut open the box*
- Cut the tape on top only. Don’t use a knife down the sides - you’ll scratch the machine.
- Lift the box up and off. Remove the top foam and plastic bag.

3. *Remove transit bolts*
This is the most important step. LG fits 4 big bolts on the back to stop the drum moving in transit.
- Locate the 4 bolts with plastic spacers on the back panel.
- Use the spanner in the accessory bag to remove all 4 bolts and spacers.
- Cover the holes with the plastic caps from the bag.
*Don’t run the machine with bolts still in* - it’ll shake itself to bits and void the warranty.

4. *Take out accessories*
In the drum or accessory bag you’ll find:
- Cold water inlet hose
- Drain hose clip
- Spanner for feet and bolts
- Caps for transit bolt holes
- Manual and warranty card

5. *Level the machine*
- Roll it into position. Keep 5cm gap at the back.
- Use a spirit level on top. Adjust the front feet by hand until it’s level and doesn’t rock.
- Lock the feet with the nut once level. An unlevel machine causes UE errors and noise.

6. *Connect hoses*
- Screw the cold water inlet hose to the cold tap and the blue inlet on the back. LG front loaders in the UK use cold fill only.
- Push the drain hose into your standpipe or under-sink connection. Use the U-bend clip so it doesn’t slip out.
- Don’t overtighten. Hand tight + quarter turn is enough.

7. *First power-up and drum clean*
- Plug in, turn on the tap.
- Run a *Tub Clean* or *Cotton 60°C* cycle empty. This clears factory dust and tests for leaks.
- Check under and behind for leaks while it runs.

8. *Final checks*
- Keep the transit bolts and spanner. You’ll need them if you ever move house.
- Register the machine on LG UK website for warranty.
- Leave the door and drawer open for an hour after use to prevent mould.

Видео How to unboxing LG front load Fully Automatic Washing machine step by step канала WM TV UK