Motorola Moto G4 Screen Repair, Teardown and Reassemble - Fixez.com

https://www.fixez.com presents the official Motorola Moto G4 Screen Repair, Teardown and Reassemble Guide. This step-by-step repair video will show you how to replace a broken or damaged Moto G4 screen, and also how to completely teardown and reassemble your Motorola smartphone. Visit Fixez.com for all of the DIY Moto G4 replacement screens, parts and tools you need to quickly, and affordably, fix your device! https://www.fixez.com/store/motorola/motorola-moto-g4

If you need your Motorola Moto G4 repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your Motorola phone for you. They are available Monday – Friday, 9am to 5pm PST.

Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom

Motorola Moto G4 Screen Repair, Teardown and Reassemble Guide Video Transcription:

Warning:

You are performing this repair at your own risk
We claim no responsibility for any damages that might occur

Find the premium tools used during this DIY Moto G4 repair here: https://www.fixez.com/categories/repair-tools

Step 1

Power down your Motorola Moto G4 smartphone.

Step 2 (Moto G4 Rear Cover and SIM Card Trays)

Use the plastic triangle opening tool, or your fingernails, to work around the Moto G4 rear cover and release the plastic clips securing it in place.

Remove both Nano SIM card trays.

Step 3 (Moto G4 Midframe)

Remove the following 19 T4 Torx screws.

Using the tweezers, remove the plastic cover and then detach the laser autofocus and dual-LED flash flex cable from the Moto G4 motherboard.

Easily remove the G4 midframe.

Step 4 (Moto G4 Laser Autofocus and Dual-LED Flash Cable)

Carefully pry up and remove the Moto G4 laser autofocus and dual-LED flash flex cable from the midframe.

Step 5 (Moto G4 Battery)

Peel up the piece of Kapton tape.

Disconnect the battery cable from the Moto G4 motherboard.

Carefully peel up the black tape.

Pry up and remove the Moto G4 lithium-ion 3000 milliampere-hour (mAh) battery.

Step 6 (Moto G4 Motherboard)

Use the fine tip curved tweezers to disconnect the bevy of cables from the motherboard.

Remove the following 2 T4 Torx screws.

With the cables detached, and screws removed, use the spudger to pry up and remove the Moto G4 motherboard.

Step 7 (Moto G4 Rear-Facing Camera and Front-Facing Camera)

Peel up the Kapton tape and release the ZIF connector.

Remove the 5 MP, auto-HDR Moto G4 front-facing camera from the motherboard.

Again, peel up the Kapton tape and release the ZIF connector.

Remove the 13 MP, auto-HDR Moto G4 rear-facing camera.

Step 8 (Moto G4 Vibrator, Headphone Jack, and Earpiece Speaker)

Remove the Moto G4 vibrator from the chassis.

Use the tweezers to carefully pry up and remove the headphone jack.

Remove the Moto G4 earpiece speaker.

Step 9 (Moto G4 LCD Screen and Digitizer Assembly)

Use the heat gun to warm up the adhesive securing the Moto G4 LCD screen and digitizer assembly to the frame.

With the precision knife, carefully create separation and insert a playing card to start slicing through the adhesive.

Take your time and apply additional heat as needed.

Once you have sliced through the adhesive, be mindful of the ribbon cable and fingerprint sensor when decoupling the Moto G4 display assembly from the frame.
* To reassemble your device, follow the steps in reverse order.

Видео Motorola Moto G4 Screen Repair, Teardown and Reassemble - Fixez.com канала Fixez.com