How to make a contactor latching with timer relay - Easy & Fun!

How to make a #ContactorLatching with Timer Relay ( E01 ).

🎯 Firstly turn on the MCB switch .

Then Timer relay start work, after few second ⏱️,the timer relay will triggering💢 the contactor to work. at the same time , The timer relay will immediately turn off.
Because the timer relay installed in the NC contactor and contactor in lock by
No 1-3 time relay, so that the contactor will continue to be locked.

The required materials are as below :-

1) MCB 10A .
2) Contactor 1NC-1NO
3) Timer Relay.⏱️ ( AH3-3 )
4) Timer socket.
5) LED lights bulb.💡

Have fun trying the recipe 😀.

#TimerRelay
#contactor
#MCB
#DIY恋人
#contactor_latching
Thanks for watching this video, 🔆Kindly please subscribe and share this channel
for more updates.🙏

---------------------------------------------------------------------
Channel links :
https://youtube.com/channel/UCzh3vJUpdU0N3x64Csa8Ufw
--------------------------------------------------------------------
📟 Omron PLC Programming Tutorial:
https://www.youtube.com/playlist?list=PLT7A5RhrTYCYYLuNhdNvmB20jT3jM9ISO
---------------------------------------------------------------------
🔌⚡Electrical work and tutorial:
https://www.youtube.com/playlist?list=PLT7A5RhrTYCZ3GMxoXX-8mRRAfYZHmoFh
---------------------------------------------------------------------
💡Electronic Hobby small project:
https://www.youtube.com/playlist?list=PLT7A5RhrTYCZ5LFVedsgfYMNe43Rs4Wqu
---------------------------------------------------------------------
💖 Kata-kata Mutiara:
https://www.youtube.com/playlist?list=PLT7A5RhrTYCYWeNUhw_nklYVUCz0EQMBo
---------------------------------------------------------------------

如何通过定時继电器 ( Timer Relay ) ,启动电触器(Contactor) 让灯泡发亮🔆？

🎯首先,打开断路器（MCB) , 🔌电源通过将启动定時继电器(Timer Relay). 过几秒后⏱️, 电接触器(contactor) 被激活. 因电接触器激活而让电源通过,才能让灯泡发亮🔆💡.

❤️谢谢大家观看此视频,记得按"订阅"🔔,
和"分享"出去喔...🙏 谢谢大家支持了.🔆

Видео How to make a contactor latching with timer relay - Easy & Fun! канала DiY恋人たち@工作室