The Crooked Crane Warehouse - STL Files - Test Prints

3D Printable STL Files for Tabletop Games, Board Games, Wargaming, and RPG

https://www.kickstarter.com/projects/crosaden/the-crooked-crane-warehouse-stl-files

Printed: on a Bambu Lab A1 using 0.4 mm nozzles with Generic PLA settings.
Filament: 2 different skin tone pla
Layer Height: .2mm
Supports: No supports are required — all pieces are designed for support-free printing.
The only exception is the uncut crane version, which requires one support for the hook.
A cut version of the crane is also included; it requires no supports but needs to be glued during assembly.

The character shown in the test print video is 28 mm, used to showcase the scale of the prints.

The set is designed to print support-free.
The uncut version can be printed on printers with a 25x25 cm build volume or larger.
The cut version with OpenLOCK connectors can be printed on printers with a 20x20 cm build volume or larger.
The set includes a two-story building with a fully playable interior.
It also comes with an attachable crane for the second floor, featuring modular crane props that can be hung from the hook.
The crane also has a stationary ground version, using the same modular system for flexibility.
The set includes 5 standard props and 7 modular crane props.
The cranes are available in both cut and uncut versions, depending on your preference.
The uncut version requires only one support point (for the hook).
The cut version features a separate hook with rope attached; the top part of the rope is separated so it can be glued to the crane during assembly.

Видео The Crooked Crane Warehouse - STL Files - Test Prints канала Crosaden