(Part 2) Building APRS iGate flashing (TNC)
Building APRS iGate with Node MCU (ESP8266) -- Part 2
Credit go to : E27ASY and indy igate's team for provided firmware and schematic diagram
link to firmware for TNC:
https://drive.google.com/drive/folders/0B1XXGsB4J5lESmV4bkRGNkJ1cDQ
Link for Xloader:
https://www.hobbytronics.co.uk/arduino-xloader
Видео (Part 2) Building APRS iGate flashing (TNC) канала Naiyim's Garage
Credit go to : E27ASY and indy igate's team for provided firmware and schematic diagram
link to firmware for TNC:
https://drive.google.com/drive/folders/0B1XXGsB4J5lESmV4bkRGNkJ1cDQ
Link for Xloader:
https://www.hobbytronics.co.uk/arduino-xloader
Видео (Part 2) Building APRS iGate flashing (TNC) канала Naiyim's Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
After fixed Jeep ECU from Bench then test with Engine , worked smooth at idle and rev up #jeep
Haunting Idle - Speeduino 0.4.3b on Jeep 4.0
CPS and. CMP sensor. Trigger Jeep 2000 pattern. #jeep #cherokee
Jeep 4.0L controlled by Arduino 2560. #jeepxj #Arduino
Comparison Japanese Car Coil on Plug
Test Coil on Plug for. ECU project - then Smoke !! #automobile #jeepxj #mechanic
XS version Based on Speeduino designed 0.4.3b
Experiment on using Coil On Plug (COP) for Jeep 4.0. #jeepxj #cherokee #jeep
Speeduino. V0.4.3b on Jeep 4.0L. #jeepxj #cherokee #mechanic #jeep
No more distributor , Direct coil "coil packed". #jeepxj
Jeep 4.0L. ECU. Speeduino 0.4.3b #JeepXJ
Jeep timing #jeepxj #automobile #cherokee
Jeep 4.0 XJ. Controlled by Speeduino 0.4.3b (Arduino) #jeepxj #cherokee
#ArduinoGauge. #jeepxj with OLED 1.3" #automobile #mechanic
After finished replaced gasket ,spark plug and intake manifold and Exhaust Manifold. Smooth...
Removed Value cover in order to change Gasket #jeep #jeepxj
Replaced intake manifold and exhaust.
Making my own Throttle Body Gasket
Painting Day
Rising up tool #jeepxj
Arduino made for External Voltage Regulator for Jeep 4.0L worked #jeepxj